Author Topic: Thank you  (Read 462 times)

Offline Wrinkly

  • Jr. member
  • **
  • Posts: 1
Thank you
« on: March 13, 2019, 03:17:39 PM »
Thank you for allowing me to join.  I am very unlikely to be able to add any thing of value to the forum as I have very little knowledge of engineering. I arrived here by accident after looking for information about the 'Minnie' traction engine. Some twenty years ago I bought the book, an Atlas lathe and began to chew metal. Made a few parts for my motorbike, nothing I couldn't have bought, but had some fun. Then I sold everything a bought a narrowboat. Still on the boat but still a hankering to build or rescue/salvage a part made project. Well that's a bit about me. SO I'll hide in the back ground and marvel at all the wonderful work that goes on.

Online b.lindsey

  • Global Moderator
  • Full Member
  • *****
  • Posts: 13584
  • Dallas, NC, USA
    • Workbench-Miniatures
Re: Thank you
« Reply #1 on: March 13, 2019, 03:45:12 PM »
Welcome to the forum Wrinkly. There are all skill levels here so don't let that deter you at all. Do you have any engine projects in mind yet or at the point of building your shop back up? Glad to have you join us.

Bill

Offline Don1966

  • Full Member
  • *****
  • Posts: 5993
  • Morgan City, LA (Along the Gulf Coast)
Re: Thank you
« Reply #2 on: March 13, 2019, 04:13:23 PM »
Hi Wrinkly and welcome to the forum!


 :hi:
Don

Online steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 10237
  • Central Massachusetts, USA
Re: Thank you
« Reply #3 on: March 13, 2019, 04:24:05 PM »
Welcome!

Dave
"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Offline Kim

  • Global Moderator
  • Full Member
  • *****
  • Posts: 3634
  • Portland, Oregon, USA
Re: Thank you
« Reply #4 on: March 13, 2019, 04:48:24 PM »
Welcome to the forum, Wrinkly!
Kim

Offline Ye-Ole Steam Dude

  • Full Member
  • ****
  • Posts: 1424
  • Deep East Texas on Sam Rayburn Lake
Re: Thank you
« Reply #5 on: March 13, 2019, 04:55:51 PM »
Hello Wrinkly and  :hi:

Whatever you build take plenty of photos and share here with us...we love photos. :ROFL:

Have a great day,
Thomas

Offline scc

  • Full Member
  • ****
  • Posts: 554
  • Lancashire, UK
Re: Thank you
« Reply #6 on: March 13, 2019, 05:07:11 PM »
Welcome along Wrinkly :cheers:  There is an Atlas lathe in my shop.    Get a "butty" alongside and you've got workshop space :LickLips:
Regards         Terry