Author Topic: Karl Benz Motor (Read 2489 times)

mikemill · « **on:** February 10, 2019, 02:09:51 PM »

Found this on HMEM, a superb model

<a href="https://www.youtube.com/watch?v=htK9JrYNRZ4" target="_blank">http://www.youtube.com/watch?v=htK9JrYNRZ4</a>

Enjoy

b.lindsey · « **Reply #1 on:** February 10, 2019, 02:13:40 PM »

Thanks for bringing it over to MEM mike. What an incredible model!!

Bill

Steve17 · « **Reply #2 on:** February 10, 2019, 03:20:28 PM »

What an amazing model.

Steve.

crueby · « **Reply #3 on:** February 10, 2019, 03:40:41 PM »

Just an incredible level of detail and finish!

Ye-Ole Steam Dude · « **Reply #4 on:** February 10, 2019, 05:19:59 PM »

Hello Mike,

Oh wow, that is just too far out. Love that little engine sound.

Have a great day,
Thomas

RonGinger · « **Reply #5 on:** February 10, 2019, 05:51:59 PM »

Wonder how he trained that doll to drive it?

I bet she has a radio hidden under her skirt

Vixen · « **Reply #6 on:** February 10, 2019, 07:52:45 PM »

Fabulous model, beautifully made and presented.

I am sure I have seen a casting kit for this engine on sale somewhere.

Can Jo or anyone point me in the right direction.

Mike

fumopuc · « **Reply #7 on:** February 10, 2019, 08:06:29 PM »

https://www.ts-modelldampfmaschinen.de/gussteilesaetze-verbrennungsmotoren/verbrennungsmotor-karl-benz.html

Vixen · « **Reply #8 on:** February 10, 2019, 08:11:58 PM »

Thank you Achim

What I need now is another distraction from the Jupiter and Mercedes W165. But you have got to admit, it would be a beautiful engine to build.

Mike

Jo · « **Reply #9 on:** February 10, 2019, 08:43:56 PM »

Mike, think of it as fast build/light relief from building your other 2 longer term engines

Jo

Vixen · « **Reply #10 on:** February 10, 2019, 08:54:17 PM »

Quote from: Jo on February 10, 2019, 08:43:56 PM

Mike, think of it as fast build/light relief from building your other 2 longer term engines

Jo

Hi Jo

You have almost convinced me. But.... But after the engine, there is the chassis and wheels

And my good lady gets to do the dolly

Mike

Vixen · « **Reply #11 on:** February 10, 2019, 09:00:01 PM »

Hello Jo

Do you by chance have this casting set in your collection?

Mike

Jo · « **Reply #12 on:** February 10, 2019, 09:03:13 PM »

You are going to do the same for the Merc and the Jupiter as well are you Mike

I don't have that one yet but someone is recalculating how long it should take me to make all the model engines in his casting collection based on the progress on the No 1 and he reckons he needs more casting sets

Jo

Jasonb · « **Reply #13 on:** February 11, 2019, 07:04:46 AM »

Mike I have seen a 1:1 scratch built one on the same forum if you really want a challenge

As I have said in other threads buying from Torsten can be a bit of a pain and I'm sure Jo would not want to pay the extra fees onto of the list price.

No more castings for me for a while as I have a new machine arriving soon that I need to accommodate and learn how to use as it has no handwheels

Jo · « **Reply #14 on:** February 11, 2019, 07:18:49 AM »

Sounds like a good reason to extend the workshop JB

Jo

Zephyrin · « **Reply #15 on:** February 11, 2019, 08:35:09 AM »

The same model build by another model engineer here, almost finished.
https://www.usinages.com/threads/moteur-karl-benz.117329/page-4
And its engine runs beautifuly.

<a href="https://www.youtube.com/watch?v=yzwHSjKnlec" target="_blank">http://www.youtube.com/watch?v=yzwHSjKnlec</a>

an engine to build, defintively, on my todo list

Vixen · « **Reply #16 on:** February 11, 2019, 05:27:06 PM »

Quote from: Jasonb on February 11, 2019, 07:04:46 AM

As I have said in other threads buying from Torsten can be a bit of a pain and I'm sure Jo would not want to pay the extra fees onto of the list price.

Hello Jason,

Can you please enlighten me as to how can Torsden be a pain ( I have discovered he prefers to converse only in the German language) and also what you mean by extra fees.

Cheers

Mike

Jasonb · « **Reply #17 on:** February 11, 2019, 05:33:56 PM »

Google Translate sorted me out when I bought from him in the past, have a look at this post and the few below

http://www.modelenginemaker.com/index.php/topic,8668.msg189177.html#msg189177

Vixen · « **Reply #18 on:** February 11, 2019, 06:27:24 PM »

Hello Jason

Conversing In German is not a problem for me.

Thanks for the insight into the bank charge fees, they could add a lot to the final cost.

Mike

Jasonb · « **Reply #19 on:** February 11, 2019, 06:40:42 PM »

You could always buy a few other sets to go with it that way the one off fees don't seem so bad when divided by two or three.

Though I thought you may just let the CNC carve it out of a lump of something if you could find drawings or one to measure. His iron is some of the nicest I have machined, very high carbon content which is more like machining the lead of a 4B pencil

I think the foundry must use oil bound sand as the surface texture is also almost non existant.

Vixen · « **Reply #20 on:** February 11, 2019, 07:49:24 PM »

Quote from: Jasonb on February 11, 2019, 06:40:42 PM

Though I thought you may just let the CNC carve it out of a lump of something if you could find drawings or one to measure.
.

Ha, ha. Provide a drawing and press the GO button.

:

If only CNC machining were that simple.

Cheers

Mike

TonyM · « **Reply #21 on:** February 25, 2019, 01:34:49 PM »

I have been talking to Torsten using Google translate and he always answers promptly. Bit of a delay in getting castings though. Nevertheless he posted me a full set of drawings in advance of any payments while I wait for the castings..

mnay · « **Reply #22 on:** February 25, 2019, 05:22:34 PM »

Are just the plans available somewhere?
Mike

News:

Author Topic: Karl Benz Motor (Read 2489 times)