Author Topic: Vulcan Machine Co  (Read 1791 times)

Offline steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 12697
  • Central Massachusetts, USA
Vulcan Machine Co
« on: November 22, 2019, 10:22:34 PM »
Hey   Anybody looked into these people?    Curious

https://www.vulcanmachineco.com/

Dave
"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Offline PJPickard

  • Full Member
  • ****
  • Posts: 282
Re: Vulcan Machine Co
« Reply #1 on: November 23, 2019, 11:49:51 AM »
I'm crossing my fingers to be a beta tester. I made it to round two!

Offline kvom

  • Full Member
  • *****
  • Posts: 2649
Re: Vulcan Machine Co
« Reply #2 on: November 23, 2019, 12:04:28 PM »
Compared to my current Novakon mill, the Vulcan has a considerably smaller work envelope.  But it wins in having servos vs. stepper, 10K vs. 4K max rpm, BT30 vs. R8, power vs. manual drawbar, 5 vs. 2 HP.

Waiting to see price with stand, enclosure, and coolant.

Offline steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 12697
  • Central Massachusetts, USA
Re: Vulcan Machine Co
« Reply #3 on: November 23, 2019, 12:11:28 PM »
Compared to my current Novakon mill, the Vulcan has a considerably smaller work envelope.  But it wins in having servos vs. stepper, 10K vs. 4K max rpm, BT30 vs. R8, power vs. manual drawbar, 5 vs. 2 HP.

Waiting to see price with stand, enclosure, and coolant.
12K spindle
"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Offline b.lindsey

  • Global Moderator
  • Full Member
  • *****
  • Posts: 13860
  • Dallas, NC, USA
    • Workbench-Miniatures
Re: Vulcan Machine Co
« Reply #4 on: November 23, 2019, 09:05:52 PM »
Nice looking machine. Will be watching for further info from them.

Bill

Offline PJPickard

  • Full Member
  • ****
  • Posts: 282
Re: Vulcan Machine Co
« Reply #5 on: November 26, 2019, 11:06:53 AM »
Made it to round three! Now I have a 25 minute phone call scheduled with them.

Offline b.lindsey

  • Global Moderator
  • Full Member
  • *****
  • Posts: 13860
  • Dallas, NC, USA
    • Workbench-Miniatures
Re: Vulcan Machine Co
« Reply #6 on: December 06, 2019, 06:35:05 PM »
Any updates PJ?

Bill

Offline PJPickard

  • Full Member
  • ****
  • Posts: 282
Re: Vulcan Machine Co
« Reply #7 on: December 08, 2019, 12:55:14 PM »
Yes...I made the cut to get a machine. Initially I was really excited but as I looked at the costs to get the machine tooled up the price is just too high. The ultimate number is getting into the territory of a used Haas or similar. I toyed with selling my Aciera F2 to help fund it but I really don't want to get rid of it. I may regret this going forward but I just couldn't justify it at this point. I am looking forward to see the machine and hear others experience.

Offline kvom

  • Full Member
  • *****
  • Posts: 2649
Re: Vulcan Machine Co
« Reply #8 on: December 08, 2019, 01:49:14 PM »
Can you lay out the cost estimates you came up with?

Offline steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 12697
  • Central Massachusetts, USA
Re: Vulcan Machine Co
« Reply #9 on: December 08, 2019, 02:44:27 PM »
Yes...I made the cut to get a machine. Initially I was really excited but as I looked at the costs to get the machine tooled up the price is just too high. The ultimate number is getting into the territory of a used Haas or similar. I toyed with selling my Aciera F2 to help fund it but I really don't want to get rid of it. I may regret this going forward but I just couldn't justify it at this point. I am looking forward to see the machine and hear others experience.

Same story with me.    We have NDAs so we cant get specific.

Dave
"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Offline Vixen

  • Full Member
  • *****
  • Posts: 3075
  • Hampshire UK
Re: Vulcan Machine Co
« Reply #10 on: December 08, 2019, 03:12:07 PM »
Thanks for letting us all know as much as you are allowed about Vulcan and the way they work.

Sounds like Vulcan Machine Co are trying to groom people into being the first paying customers, rather than genuine Beta testers.  :ThumbsDown: :ThumbsDown:

But I could be wrong

Mike
« Last Edit: December 08, 2019, 03:57:10 PM by Vixen »
It is the journey that matters, not the destination

Sometimes, it can be a long and winding road

Offline PJPickard

  • Full Member
  • ****
  • Posts: 282
Re: Vulcan Machine Co
« Reply #11 on: December 08, 2019, 03:52:08 PM »
I really don't think they are trying to convert Beta testers to paying customers. I think they are making a good effort and will be a competitor to Tormach, it will take some time. Another thing for me is the travels are a bit small. Right now my main concentration is live steam locomotives.

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal