Welcome to ModelEngineMaker !If you have problems registering or logging in, please use the contact menu option to request assistance.
Hello everyone !I didn't want to start a rumble, I must say all your advice are helpful, I see some of them useful in the short term, and other in the long term.I realize that a Taig is not a Schaublin 70/102 but I also realize that I'll not need that schaublin for what I want to do at least at start.Thanks a lot to all of you really, because it helps to have a lot of advice, and thanks for your last post Dave it gives a good idea of what can be done !In the same idea I found that channel yesterday evening while youtubing in bed: https://www.youtube.com/channel/UCMHn1eQLofbEeOczp7qCsBw (I don't know if working with clothe on the lathe bed is the best idea in the world...) it also gives a good idea of what sherline/taig can do and what are their limits (and also how to correct some problems !)So now I'm convinced that Taig/Sherline is certainly what I need for a start and as all of you said it's not a loss because either i'll resell it or keep it for small work later I keep this thread as a reference because you indeed find a lot of "Cazeneuve/Mori Seiki or die" on the interweb and this one can help for a beginner.So Taig it'll be (I'll also learn how to assemble it)Look at the book link I'll certainly get some PS:The reason I'm interested in micro ICE is because I needed a reason to learn machining (and especially using lathe) because I have an ongoing project of different kind of motor. Initially I wanted to be able to machine a Macor block to make a tiny Ionic Thruster. But I think I'll keep doing the two now/
Hello everyone !