Author Topic: Let's see and discuss your Elmer's Engines  (Read 4323 times)

Offline Flyboy Jim

  • Full Member
  • ****
  • Posts: 2002
  • Independence, Oregon
Re: Let's see and discuss your Elmer's Engines
« Reply #30 on: January 30, 2020, 04:13:02 AM »
Here's mine.

The launch engine was my 2nd engine. I thought it had gone well until someone pointed out my slitting saw was upside down and I had rubbed the grooves in the valve rather than cutting them.  :facepalm2:
The mill engine was my 3rd engine. It's probably my favorite. It works.  ;D

I pretty much go by plans but am trying to develop a little..."make it mine".

Zee, I remember when I started my #43 Mill Engine build that you said it was one of your favorites. When I got finished, I'd have to say it was the same for me. Learned a lot from that engine build. I think it's time for another Elmer's engine.  :)

Jim
Sherline 4400 Lathe
Sherline 5400 Mill
"You can do small things on big machines, but you can do small things on small machines".

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal