Author Topic: Little Demon V8  (Read 1658 times)

Offline Spanner

  • Jr. member
  • **
  • Posts: 3
Little Demon V8
« on: February 02, 2019, 02:28:04 AM »
Hullo members, can anyone help with cad drawing showing lobe degrees ect or G code for Little Demon V8 Camshaft thank you Peter

Online steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 12697
  • Central Massachusetts, USA
Re: Little Demon V8
« Reply #1 on: February 02, 2019, 02:38:48 AM »
Hi Spanner!   Welcome to the forum!    I'm sure Steve Huck will along shortly will be glad to help you out, as he was the designer of the Demon.  Meanwhile, pop over to the "introduce yourself" section and consider putting up a post telling us about yourself.   We'll be glad to help

Dave  (steamer)
Moderator
"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Offline stevehuckss396

  • Full Member
  • ****
  • Posts: 1554
  • Sterling Heights, MI USA
    • Steve's Miniature Sparkplugs
Re: Little Demon V8
« Reply #2 on: February 02, 2019, 03:24:55 AM »
Hello Peter!

Lobe degree is 280 duration (140 cam degrees) with 110 degrees separation and .070 lift and a flank radius of .696. Cant help with Gcode as I cut mine manually.
Do not be like the cat who wanted a fish but was afraid to get his paws wet.

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal