Author Topic: Removable crank for Sherline Rotary table  (Read 660 times)

Offline Vixen

  • Full Member
  • ****
  • Posts: 999
  • Hampshire UK
Re: Removable crank for Sherline Rotary table
« Reply #15 on: January 01, 2019, 11:35:59 PM »
Green with Aciera envy ::) :disappointed: :disappointed:
It is the journey that matters, not the destination

Online steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 9663
  • Central Massachusetts, USA
Re: Removable crank for Sherline Rotary table
« Reply #16 on: January 02, 2019, 01:01:41 AM »
Green with Aciera envy ::) :disappointed: :disappointed:

Any time you want to pop over and use it Mike, you're welcome to.    8)

Dave
"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Offline Art K

  • Full Member
  • ****
  • Posts: 972
  • Madison, Wisconsin USA
Re: Removable crank for Sherline Rotary table
« Reply #17 on: January 02, 2019, 02:23:01 AM »
Dave,
That's an elegant solution, very creative. I'm not sure I would do well on your Aciera mill. To many variables, but then again an almost infinite way to set things up. good job
Art
"The beautiful thing about learning is that no one can take it away from you" B.B. King

Offline Twizseven

  • Full Member
  • ****
  • Posts: 224
Re: Removable crank for Sherline Rotary table
« Reply #18 on: January 02, 2019, 01:45:30 PM »
Steamer,

You have some nice bits with your Aciera.  Mine is the earlier F12.  Gradually collecting bits.  My mate also has one (F1 version) and has made a number of castings for various parts.  Hew rebuilt the spindle is mine before I bought it of him..

Not got quite so many bits as yours.

Colin