Welcome to ModelEngineMaker !If you have problems registering or logging in, please use the contact menu option to request assistance.
DaveI should have thought to get some pictures but at the time, I was too absorbed by the problem and too aware of the consequence of failure to pick up a camera. The hole has not been reamed and was used help in holding. One of the concerns was keeping the cap registry while the sides we milled to thickness. The bolts are not enough and I don't trust superglue under the impact of milling so I clamped down on a slug of 3/8" rod. The rod was also used as a pivot to get the top radius. The bore will have brass or bronze bushings which will be reamed in place.Jerry
I am really disturbed. I spent a good amount of time writing a detailed description of the above photographs that should have appeared between each pictures and none of the interspersed text got posted. Rats!!!
Jo, thanks for the fix. Where did I go wrong? Did I exceed some limit?
I would also like to thank him for failing to mention what a nightmare it is assembling this thing and not mentioning that if the builder was a little careless or forgetful that he would find himself repeating the process more times than he wanted too. Thanks, Stew. I see now that I will repeat the process many more times before this is over.QuoteYou have to keep some issues to your self otherwise you make things to easy and there's is no challenge
You have to keep some issues to your self otherwise you make things to easy and there's is no challenge