Welcome to ModelEngineMaker !If you have problems registering or logging in, please use the contact menu option to request assistance.
Looks good, It's really a buzz to see someone making something I designed Were the drawing ok, were you able to follow my description?BillP.s the pdf is on my google drive here:https://drive.google.com/file/d/0BwXDcXKx2KzlaUVrZ0l6QU4yaTA/view?usp=drivesdk
Quote from: BillTodd on December 12, 2018, 12:19:30 PMLooks good, It's really a buzz to see someone making something I designed Were the drawing ok, were you able to follow my description?BillP.s the pdf is on my google drive here:https://drive.google.com/file/d/0BwXDcXKx2KzlaUVrZ0l6QU4yaTA/view?usp=drivesdkHi Bill, Is there any type of spring between the bearing at the top and the housing ?
Quote from: fumopuc on December 15, 2018, 07:51:32 PMQuote from: BillTodd on December 12, 2018, 12:19:30 PMLooks good, It's really a buzz to see someone making something I designed Were the drawing ok, were you able to follow my description?BillP.s the pdf is on my google drive here:https://drive.google.com/file/d/0BwXDcXKx2KzlaUVrZ0l6QU4yaTA/view?usp=drivesdkHi Bill, Is there any type of spring between the bearing at the top and the housing ?Yes, it should be just strong enough to push the body back when horizontal, but not too strong.The spring should be the same diameter as the bearing so that it pushes on the outer race , the bearing stops the spring being wound up as the spindle turns