Dave - sorry for slow reply, yes got lots of collets, chucks, tool holders, centres, face-plates etc. I'll post some pictures of all that shortly.
So the last few weeks have been spent on painting and then re-assembling - seems to take ages to mask all the bright work / un-painted areas and then apply several coats of paint. Putting the saddle back together was a challenge - there is a definite order and you seem to need multiple pairs of hands to engage the half nut casting with the engagement lever and then spent some time adjusting all the gibs - three for the saddle and the one on the cross-slide - do like the tapered gibs with the axial adjustment screws though.
Here's some before and after pictures;