Welcome to ModelEngineMaker !If you have problems registering or logging in, please use the contact menu option to request assistance.
Use the Loctite to get the parts properly located and fixed. Then pin the joints for extra insurance...you won't have to worry about it after that!Bill
I use #638 Loctite on everything. It is the only Loctite I use. It works great for assembling small crankshaft, and as an added locking feature, I wait 24 hours for the Loctite to cure, then drill and pin the joints with a piece of 1/16" music wire, which has been (of course) dipped in Loctite before being pushed (not pressed) into place. have never used tapered pins.---Brian