Author Topic: Making a Buzz Coil and relays that don't seem to work.  (Read 1602 times)

Offline Doc

  • Full Member
  • ****
  • Posts: 868
  • USA ND
Making a Buzz Coil and relays that don't seem to work.
« on: October 16, 2018, 03:16:07 PM »
Well I ordered some cheap relays and attempted to make a buzz coil but couldn't get them to work. So I figured what do I have to loose I opened one up to see. Seems the spring pressure on the contacts was to strong and the magnetic coil was to cheap to react fast enough for them to work. So I did a little tweaking and made the gap between the magnetic coil and contact carrier about half and bent down the normal open contact to get it out of the way and now they work like a charm. Here is a video of the process.

<a href="https://www.youtube.com/watch?v=mqUdxWzZkog" target="_blank">http://www.youtube.com/watch?v=mqUdxWzZkog</a>


And here I am playing with one that I modified and made a small Jacobs Ladder LOL.


<a href="https://www.youtube.com/watch?v=AnhMsS812-0" target="_blank">http://www.youtube.com/watch?v=AnhMsS812-0</a>

Offline Johnmcc69

  • Full Member
  • ****
  • Posts: 792
  • Erie Pa., USA
Re: Making a Buzz Coil and relays that don't seem to work.
« Reply #1 on: October 16, 2018, 04:03:22 PM »
That's pretty neat Doc. I'll file that info away.
 Very cool...

 John

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal