Author Topic: cad-modelltechnik-jung v8  (Read 826 times)

Offline icman

  • Full Member
  • ****
  • Posts: 24
  • lincs uk
cad-modelltechnik-jung v8
« on: September 15, 2018, 02:34:26 PM »
Any body out there made this engine ? The plans are in german and the google translation does not help a lot .Currently half way through build . regards mike
Above workshop door. "abandon hope all ye that  enter here "

Offline b.lindsey

  • Global Moderator
  • Full Member
  • *****
  • Posts: 13260
  • Dallas, NC, USA
    • Workbench-Miniatures
Re: cad-modelltechnik-jung v8
« Reply #1 on: September 15, 2018, 04:08:27 PM »
Any pictures of your progress Mike?

Bill

Online Vixen

  • Full Member
  • ****
  • Posts: 1114
  • Hampshire UK
Re: cad-modelltechnik-jung v8
« Reply #2 on: September 15, 2018, 04:22:06 PM »
Not come across these drawing sets before but there are come interesting looking engines in there. I particularly like the looks of the V8 with the propeller reduction gear

Mike
It is the journey that matters, not the destination

Offline steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 10101
  • Central Massachusetts, USA
Re: cad-modelltechnik-jung v8
« Reply #3 on: September 15, 2018, 08:22:40 PM »
Not come across these drawing sets before but there are come interesting looking engines in there. I particularly like the looks of the V8 with the propeller reduction gear

Mike

Ordered the V8 air cooled Mike....I'll let you know what they look like when I get them

Dave
"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Online Vixen

  • Full Member
  • ****
  • Posts: 1114
  • Hampshire UK
Re: cad-modelltechnik-jung v8
« Reply #4 on: September 15, 2018, 08:36:21 PM »
Good move Dave. I'm tempted, but I really do have enough on the go at the moment.

Mike
It is the journey that matters, not the destination

Offline steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 10101
  • Central Massachusetts, USA
Re: cad-modelltechnik-jung v8
« Reply #5 on: September 15, 2018, 09:04:24 PM »
I like reference material....  8-)

Dave
"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Online Jo

  • Administrator
  • Full Member
  • *****
  • Posts: 12255
  • Hampshire, england.
Re: cad-modelltechnik-jung v8
« Reply #6 on: September 15, 2018, 09:06:42 PM »
I'm tempted, but I really do have enough on the go at the moment.

 :lolb:

Someone once told me that if you run out of models to build there is a risk you might die  :facepalm: Anyway what is nicer than a nice set of engine drawings to admire as the evenings get colder (other than a nice set of drawings complete with their castings  ::) )

Jo
Usus est optimum magister

Online Vixen

  • Full Member
  • ****
  • Posts: 1114
  • Hampshire UK
Re: cad-modelltechnik-jung v8
« Reply #7 on: September 15, 2018, 09:10:05 PM »
Jo

Someone else told me " He (she) who dies with the most toys ....wins"

Besides, I have a nice 3D CAD drawing package waiting to be learned when the evenings get colder. What can be nicer than a complete set of your own drawings?

Mike
« Last Edit: September 15, 2018, 09:13:50 PM by Vixen »
It is the journey that matters, not the destination

Online Jo

  • Administrator
  • Full Member
  • *****
  • Posts: 12255
  • Hampshire, england.
Re: cad-modelltechnik-jung v8
« Reply #8 on: September 15, 2018, 09:14:11 PM »
Someone else told me " He (she) who dies with the most toys ....wins"

Did you see I now have the Minx  :mischief:

Jo
Usus est optimum magister

Online Vixen

  • Full Member
  • ****
  • Posts: 1114
  • Hampshire UK
Re: cad-modelltechnik-jung v8
« Reply #9 on: September 15, 2018, 09:17:03 PM »
Ha ha, How could we miss, you posted it all over the forum.

Pretty little motor :ThumbsUp: :ThumbsUp:

Mike
It is the journey that matters, not the destination

Offline icman

  • Full Member
  • ****
  • Posts: 24
  • lincs uk
Re: cad-modelltechnik-jung v8
« Reply #10 on: September 16, 2018, 10:33:20 PM »
I have been building this engine for the past 8 months .So far i have found 4 different faults on the drawings ,i have notified cad and they have now revised their drawings.The build notes are in german and the google translation is of very little help !Cad did not offer the build notes in english ,which i find very strange .The drawings are very good but complicated (not for the beginner )Be interesting to hear from other builders ,if there are any .
Above workshop door. "abandon hope all ye that  enter here "

Online Vixen

  • Full Member
  • ****
  • Posts: 1114
  • Hampshire UK
Re: cad-modelltechnik-jung v8
« Reply #11 on: September 16, 2018, 10:44:32 PM »
Hello Mike,

I don't think many folk have discovered cad-modeltechnik-jung. You may be the first on the forum.
Have you discovered how to post picture on the website yet? There are quite a few members who would love to see what you have achieved to date. Better still, why not start a build log with photos, description, problems solved etc.

You could always write the build notes in English for them. That would be better than any auto translated stuff

Cheers :cheers:

Mike
« Last Edit: September 16, 2018, 10:47:36 PM by Vixen »
It is the journey that matters, not the destination

Offline Jasonb

  • Full Member
  • *****
  • Posts: 6359
  • Surrey, UK
Re: cad-modelltechnik-jung v8
« Reply #12 on: September 17, 2018, 07:30:11 AM »
I've had a few of their drawings for years Mike but not the V8.

What CAD package do you have?

Offline icman

  • Full Member
  • ****
  • Posts: 24
  • lincs uk
Re: cad-modelltechnik-jung v8
« Reply #13 on: September 17, 2018, 11:26:09 AM »
i dont have a cad package as i am totally manual lathe and mill. The cad i refer to is "cad models " the supplier of the drawings
Above workshop door. "abandon hope all ye that  enter here "