« previous next »
Pages: [1]   Go Down

Author Topic: Checking in from Long Island, New York  (Read 1357 times)

Offline Joe P.

  • Full Member
  • ****
  • Posts: 17
Checking in from Long Island, New York
« on: September 05, 2018, 02:54:47 PM »
Hey guys, grettings from New York. I am pretty much a newbie and a large portion of my machining knownledge came from YouTube videos. I found this forum this morning and decided to join. So far I built a PM Research engine from castings and several Elmer’s engines from stock which are powered by compressed air at the moment. Always looking to learn.
Logged

Offline propforward

  • Full Member
  • ****
  • Posts: 1656
  • MN, USA
Re: Checking in from Long Island, New York
« Reply #1 on: September 05, 2018, 03:10:54 PM »
That's cool - welcome. Which PMR engine did you build? Any pics of any of your engines?
Logged
Stuart

Forging ahead regardless.

Offline b.lindsey

  • Global Moderator
  • Full Member
  • *****
  • Posts: 13860
  • Dallas, NC, USA
    • Workbench-Miniatures
Re: Checking in from Long Island, New York
« Reply #2 on: September 05, 2018, 03:14:00 PM »
Hi and welcome Joe. Glad you found us and decided to join in the fun here :)

Bill
Logged

Offline Jo

  • Administrator
  • Full Member
  • *****
  • Posts: 15306
  • Hampshire, england.
Re: Checking in from Long Island, New York
« Reply #3 on: September 05, 2018, 04:34:51 PM »
 :hi: Joe,

Sounds like you have made a fair few engines, yes please to some pics of them  :)

Jo
Logged
Enjoyment is more important than achievement.

Offline Roger B

  • Global Moderator
  • Full Member
  • *****
  • Posts: 6172
  • Switzerland
Re: Checking in from Long Island, New York
« Reply #4 on: September 05, 2018, 06:19:18 PM »
Welcome to the Forum  :ThumbsUp:  :ThumbsUp: I have visited Long Island a few times in the past and enjoyed the wineries  :wine1: Pictures of your engines and workshop are always appreciated  :)
Logged
Best regards

Roger

Offline steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 12699
  • Central Massachusetts, USA
Re: Checking in from Long Island, New York
« Reply #5 on: September 05, 2018, 06:46:08 PM »
Welcome Joe!

Dave
Logged
"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Offline Dave Otto

  • Full Member
  • *****
  • Posts: 4712
  • Boise, Idaho USA
    • Photo Bucket
Re: Checking in from Long Island, New York
« Reply #6 on: September 06, 2018, 01:04:26 AM »
Hi Joe

Welcome to MEM!


Dave
Logged

Online Kim

  • Global Moderator
  • Full Member
  • *****
  • Posts: 7948
  • Portland, Oregon, USA
Re: Checking in from Long Island, New York
« Reply #7 on: September 06, 2018, 02:01:16 AM »
Hi Joe,
Welcome to the forum!
Kim
Logged

Offline Joe P.

  • Full Member
  • ****
  • Posts: 17
Re: Checking in from Long Island, New York
« Reply #8 on: September 06, 2018, 12:38:42 PM »
I posted some photos in the showcase section. To answer propforward, it was the PM Research #3 cast iron / bronze. I am almost done working on Elmer’s Scotty engine, and will add that as well. I will also get some photos of my basement shop soon.


Sent from my iPhone using Tapatalk
Logged
Pages: [1]   Go Up
« previous next »
 
SimplePortal 2.3.5 © 2008-2012, SimplePortal