Welcome to ModelEngineMaker !If you have problems registering or logging in, please use the contact menu option to request assistance.
You're going to have to be very careful, there are some unscrupulous model engineers that would court you just to get hold of that great workshop. John
No worries there: after all these years no one has caught me 'cause I am normally hiding in the workshop
Nice Jo! Would love to see pictures of the Alba.....I love shapers!....but the Aciera came up so the 7" AAMCO had to go.Dave
Jo, so the shed shown...is that the one you noted above as 20' x 10' in size ? Bill
I guess the Harrison mill isn't much good for drilling as there's no quill feed? but not sure I have room for both!The prazimat lathe looks similar to Ceriani? The mill looks similar to some of the sieg ones, as do Wabeco - I always wonder what Wabeco do to them to justify the x10 price?! Can you still buy Prazimat? How do you find it?Nick
Jo, can I claim you as my long lost sister, that way you can put me in your will. Don
Doesn't seem as though Jo is short of casting sets though John. So .... what sort of flowers and chocolates do you like?!
the type who bring you a casting set instead of flowers and chocolates.
I also think Sexy looks forlorn sat there without any Bling on her. I'm sure I can here her whispering DRO DRO DRO DRO all the way up here in the Midlands.
After seeing some tiny square footage in other UK sheds here and on YouTube, it appears that you have the Downton Abbey of sheds.
I must have missed the heat treat oven.. Where is it?
Hi Jo, many thanks for the interesting photo tour of the revised workshop and annexe: - you have got a superb workshop full of glorious machines!, not to mention all the intriguing bits and pieces...
Hi Steve,How to move the big Colchester? On 1" dia metal rollers, then using a pry bar to bump it into place. The same technique will be used for the additions I am hoping to add shortly Hi Jo, I have found it easier to control moving heavy machinery by using the rollers lengthways and sliding the lathes along them .....as the point of contact between the round rod and flat lathe bottom is quite small there is very little resistance......in metric as well as imperial !!Willbert
Quote from: Chipswitheverything on May 30, 2016, 01:12:52 PMHi Jo, many thanks for the interesting photo tour of the revised workshop and annexe: - you have got a superb workshop full of glorious machines!, not to mention all the intriguing bits and pieces...There is many years of acquisitions and hoarding there . There was one chap had a old mansion with more reception rooms than you could shake a stick at. I heard that he turned the Ballroom into his workshop, with the larger tools like the Bridgeport bolted through the Parquet floor Jo
Quote from: SteamerQuote from: G_N_R Hi JoWhat a wonderful workshop you have. Usually modellers start very young in a workshop of a relative or a friend and develop from there. So Jo where did your interest in model engineering originate? Yes I think curiosity is rampant in this regard.... DaveWhere did my interest start? Well as a toddler I showed more interest in "diggers" than dolls. I Finally convinced my parents to buy me mechanio at 14 (just what a teenage girl should want for Xmas!). At 16 I started an electrical engineering apprenticeship which for the first year included two weeks machine shop studies, which was the first time I had ever used a lathe: It did not inspire me..... At 23 I was invited to a friend's house where his father had a workshop which included a lathe and he was making a 7 1/4" locomotive. It had never dawned on me that one could own a lathe at home. (My friend was clearly not impressed that I was showing more interest in his father's workshop than I was in him, so I was never invited back). Within a week I have spotted an advert for my Myford lathe which I immediately purchased and subsequently found that one of the other engineers at work had the cylinder off of a 2" traction engine on his desk and enquired further, that led to finding my first model engineering club. I picked up a Stuart 10V at the White Elephant sale and that was the first thing I built. Over the years I have slowly began to learn how to use the lathe and various machine tools and make more and more swarf. And sometimes even bits of the odd engine! Jo- - - -(I had not mentioned the Clayton or any of my part built Locomotives as they are not actually model "Engines".)
Quote from: G_N_R Hi JoWhat a wonderful workshop you have. Usually modellers start very young in a workshop of a relative or a friend and develop from there. So Jo where did your interest in model engineering originate? Yes I think curiosity is rampant in this regard.... Dave
Hi JoWhat a wonderful workshop you have. Usually modellers start very young in a workshop of a relative or a friend and develop from there. So Jo where did your interest in model engineering originate?