Author Topic: New Member  (Read 1548 times)

Offline vickentallen

  • Jr. member
  • **
  • Posts: 2
New Member
« on: August 04, 2018, 11:18:24 PM »
Hi All, I'm a retired marine engineer, on the North West Highlands of Scotland, I pass the time restoring old motorcycles, mostly Vincent's and Bevel Ducati's, I have a small machine shop tacked on to the side of the cottage,,  Main machines are Colchester Bantam lathe & Centec 2b Mill along with Alexander  T & CG. etc,,,,,  Joined the site after buying a 4D Holdridge Radii cutter, from USA and reading the forum posts of like minded souls on here which yealded much information....   Enough for now that's the gist   best wishes all  Vic Scott

Offline Ye-Ole Steam Dude

  • Full Member
  • ****
  • Posts: 1571
  • Deep East Texas on Sam Rayburn Lake
Re: New Member
« Reply #1 on: August 04, 2018, 11:20:45 PM »
Welcome Vick to the Forum.

Have a great day,
Thomas
Thomas

Offline b.lindsey

  • Global Moderator
  • Full Member
  • *****
  • Posts: 13860
  • Dallas, NC, USA
    • Workbench-Miniatures
Re: New Member
« Reply #2 on: August 04, 2018, 11:25:04 PM »
Hi Vick, and welcome to the forum. Perhaps we can interest you in making some model engines as well.

Bill

Offline vickentallen

  • Jr. member
  • **
  • Posts: 2
Re: New Member
« Reply #3 on: August 05, 2018, 12:06:02 AM »
Hi Bill,   Thanks for the welcome, I'm afraid the eyesight is on the way out, to tackle small work, my engineering accuracy now relies more and more on a 2 Lb  hammer.

                                                                               Best Wishes,  Vic..

toolznthings

  • Guest
Re: New Member
« Reply #4 on: August 05, 2018, 01:02:36 AM »
Welcome to the forum.  :ThumbsUp:

Offline Kim

  • Global Moderator
  • Full Member
  • *****
  • Posts: 7860
  • Portland, Oregon, USA
Re: New Member
« Reply #5 on: August 05, 2018, 06:38:08 AM »
Hi Vic, welcome!
Kim

Offline Roger B

  • Global Moderator
  • Full Member
  • *****
  • Posts: 6133
  • Switzerland
Re: New Member
« Reply #6 on: August 05, 2018, 07:44:07 AM »
Welcome to the Forum  :ThumbsUp:  :ThumbsUp:
Best regards

Roger

Offline Dave Otto

  • Full Member
  • *****
  • Posts: 4693
  • Boise, Idaho USA
    • Photo Bucket
Re: New Member
« Reply #7 on: August 05, 2018, 11:36:35 PM »
Hi Vic
Welcome to MEM!


Dave

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal