Author Topic: Getting some antifatique mats today  (Read 7412 times)

Offline steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 12697
  • Central Massachusetts, USA
Getting some antifatique mats today
« on: July 28, 2018, 07:07:23 PM »
Thanks Mike!!!

Dave
"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Offline b.lindsey

  • Global Moderator
  • Full Member
  • *****
  • Posts: 13860
  • Dallas, NC, USA
    • Workbench-Miniatures
Re: Getting some antifatique mats today
« Reply #1 on: July 28, 2018, 08:48:07 PM »
What, no pictures yet??  ;)

Bill

Offline steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 12697
  • Central Massachusetts, USA
Re: Getting some antifatique mats today
« Reply #2 on: July 28, 2018, 09:46:07 PM »
My Daughter and I took them to a car wash and cleaned them....they're drying....but maybe tonight....I spent the morning at work driving a mill with a .015" endmill in stainless...... :rant:
"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Offline b.lindsey

  • Global Moderator
  • Full Member
  • *****
  • Posts: 13860
  • Dallas, NC, USA
    • Workbench-Miniatures
Re: Getting some antifatique mats today
« Reply #3 on: July 28, 2018, 09:56:34 PM »
 :o yikes!!!

Bill

Offline steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 12697
  • Central Massachusetts, USA
Re: Getting some antifatique mats today
« Reply #4 on: July 28, 2018, 10:23:59 PM »
:o yikes!!!

Bill


0.033" wide slot 0.025 deep and 3/8 long     10000 rpm.   .002"/tooth   2 flute carbide....with Kerosine
"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Offline b.lindsey

  • Global Moderator
  • Full Member
  • *****
  • Posts: 13860
  • Dallas, NC, USA
    • Workbench-Miniatures
Re: Getting some antifatique mats today
« Reply #5 on: July 28, 2018, 10:44:44 PM »
Did you do it with just one endmill?

Bill

Offline steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 12697
  • Central Massachusetts, USA
Re: Getting some antifatique mats today
« Reply #6 on: July 28, 2018, 11:20:37 PM »
Did you do it with just one endmill?

Bill

YUP!!!!!    8)
"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Offline crueby

  • Full Member
  • *****
  • Posts: 18554
  • Rochester NY
Re: Getting some antifatique mats today
« Reply #7 on: July 28, 2018, 11:44:30 PM »
Can you mill me a pocketwatch?! 

 :ThumbsUp:

Offline steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 12697
  • Central Massachusetts, USA
Re: Getting some antifatique mats today
« Reply #8 on: July 28, 2018, 11:53:36 PM »
Can you mill me a pocketwatch?! 

 :ThumbsUp:

NO!!!!!
  8)
"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Offline crueby

  • Full Member
  • *****
  • Posts: 18554
  • Rochester NY
Re: Getting some antifatique mats today
« Reply #9 on: July 28, 2018, 11:59:16 PM »

Offline Dave Otto

  • Full Member
  • *****
  • Posts: 4693
  • Boise, Idaho USA
    • Photo Bucket
Re: Getting some antifatique mats today
« Reply #10 on: July 29, 2018, 12:05:44 AM »
You were fresh out of .02" end mills? :lolb: When they get down to that size you have to look twice at the end of the cycle to see if your cutter is still there!

Dave

Offline steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 12697
  • Central Massachusetts, USA
Re: Getting some antifatique mats today
« Reply #11 on: July 29, 2018, 12:17:22 AM »
You were fresh out of .02" end mills? :lolb: When they get down to that size you have to look twice at the end of the cycle to see if your cutter is still there!

Dave


Yes you do!!!  and a couple of times in the middle of the cycle too!....   Yes that was the only size I had....no .020"

« Last Edit: July 29, 2018, 12:21:37 AM by steamer »
"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Offline steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 12697
  • Central Massachusetts, USA
Re: Getting some antifatique mats today
« Reply #12 on: July 29, 2018, 12:22:45 AM »
And you better be DAMN sure of your T0 and tool height....Always seems like I cant get that Z axis slowed down fast enough!....

 :lolb:


Dave
"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Offline Dave Otto

  • Full Member
  • *****
  • Posts: 4693
  • Boise, Idaho USA
    • Photo Bucket
Re: Getting some antifatique mats today
« Reply #13 on: July 29, 2018, 12:53:41 AM »
Ordered one of these yesterday to put in front of my mill at home.
https://www.mcmaster.com/#6912t121/=1dwywt2
I have one in front of my VMC at work and love it!

Dave

Offline steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 12697
  • Central Massachusetts, USA
Re: Getting some antifatique mats today
« Reply #14 on: July 29, 2018, 01:28:18 AM »
I have the open pattern one in front of the Southbend, but chairs won't go over it.     However I got these today, and they'll go from the Aciera, past the Clausing and the watchmakers bench and down the isle to the edge of the lathe mat.     So  I think the office chair can stay.   I like to roll back and forth from the bench to the Aciera, as the Aciera is really made to be run while sitting for the most part.

"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Offline zeeprogrammer

  • Full Member
  • *****
  • Posts: 6811
  • West Chester, PA, USA
Re: Getting some antifatique mats today
« Reply #15 on: July 29, 2018, 02:03:42 AM »
Stupid question...

Can't one find shoes with anti-fatigue pads attached?  ;D
That's what I'd like to have.

With all the swarf generated...what are the downsides to anti-fatigue pads?

I ask because I'm about to re-layout my shop in an attempt to control the swarf (not that you can 100%).
Carl (aka Zee) Will sometimes respond to 'hey' but never 'hey you'.
"To work. To work."
Zee-Another Thread Trasher.

Offline steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 12697
  • Central Massachusetts, USA
Re: Getting some antifatique mats today
« Reply #16 on: July 29, 2018, 02:09:25 AM »
Fatigue mats are magnets for swarf no matter what kind...they're soft enough to work, so the chips dig in.   If it's the mesh type, the chips fall through....it's easy to clean these, just raise them ,, shake them and then vacuum.


I've not found any shoes that work as well as mats.....Dave Otto....feel free to chime in here


As to chip control...or don't bring that *(@*(#* into the house!   control.    I have a boot mat on the stairs of my shop...go up one step, and you step on this matt which looks like a giant upside down brush.   Wipe the feet thoroughly...and proceed.   That works really well!...


Dave
"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Offline zeeprogrammer

  • Full Member
  • *****
  • Posts: 6811
  • West Chester, PA, USA
Re: Getting some antifatique mats today
« Reply #17 on: July 29, 2018, 02:16:07 AM »
Thanks Dave. I'm working on a design that puts my machines at one end of my shop with the idea that the swarf that doesn't get on me is contained and I can brush off and change shoes as I enter/exit the other part of the shop. I don't expect 100% success but this would allow people to come in to that part of my shop that's not machine related.

I like the idea of the boot mat. I know what you're referring to. Even though I don't wear boots. It's not the safest thing, I know, but I wear loafers.
Carl (aka Zee) Will sometimes respond to 'hey' but never 'hey you'.
"To work. To work."
Zee-Another Thread Trasher.

Offline crueby

  • Full Member
  • *****
  • Posts: 18554
  • Rochester NY
Re: Getting some antifatique mats today
« Reply #18 on: July 29, 2018, 02:29:02 AM »
A vacuum with a brush end on the hose is handy for gently dislodging chips stuck in cloths and skin. Leather apron helps a lot too.

Offline 10KPete

  • Full Member
  • ****
  • Posts: 1606
  • Nordland, WA, USA
Re: Getting some antifatique mats today
« Reply #19 on: July 29, 2018, 03:24:11 AM »
A good foot wiping mat at the exit of the shop keeps any chips picked up by my shoes from going any further. A bristle-y one is best.

Pete
Craftsman, Tinkerer, Curious Person.
Retired, finally!
SB 10K lathe, Benchmaster mill. And stuff.

Offline steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 12697
  • Central Massachusetts, USA
Re: Getting some antifatique mats today
« Reply #20 on: July 29, 2018, 03:24:57 AM »
A good foot wiping mat at the exit of the shop keeps any chips picked up by my shoes from going any further. A bristle-y one is best.

Pete
Works for me Pete!...
"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Offline steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 12697
  • Central Massachusetts, USA
Re: Getting some antifatique mats today
« Reply #21 on: July 29, 2018, 03:15:43 PM »
OK  laid them down this morning maximizing the coverage where I think I need it....

MUCH better on the legs!



I took a pic of the boot scraper mat that I use as well.....

Dave


"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Offline 10KPete

  • Full Member
  • ****
  • Posts: 1606
  • Nordland, WA, USA
Re: Getting some antifatique mats today
« Reply #22 on: July 29, 2018, 03:43:30 PM »
Just the ticket!

Pete
Craftsman, Tinkerer, Curious Person.
Retired, finally!
SB 10K lathe, Benchmaster mill. And stuff.

Offline b.lindsey

  • Global Moderator
  • Full Member
  • *****
  • Posts: 13860
  • Dallas, NC, USA
    • Workbench-Miniatures
Re: Getting some antifatique mats today
« Reply #23 on: July 29, 2018, 04:02:07 PM »
Those should help a lot with the leg(s) Dave.


Bill

Offline Art K

  • Full Member
  • ****
  • Posts: 1761
  • Madison, Wisconsin USA
Re: Getting some antifatique mats today
« Reply #24 on: July 29, 2018, 09:32:09 PM »
Dave,
Those are the floor mat's that I use in my home shop. For everyone else they are available at Home Depot. Since I moved the shop I need to get a few more, they come in packs of 4 and are 2 foot square. Yes the vacuum is good but also a pliers to pull out chips helps.
Carl,
As you probably noticed stuff fly's in the shop. At work I use a divider but stuff goes over the top and under the bottom, and shoes track it all over. Not that you are working with long strings of zink, but...The scrubby mats sound like a great idea.
Art
"The beautiful thing about learning is that no one can take it away from you" B.B. King

Offline steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 12697
  • Central Massachusetts, USA
Re: Getting some antifatique mats today
« Reply #25 on: July 29, 2018, 09:36:22 PM »
Dave,
Those are the floor mat's that I use in my home shop. For everyone else they are available at Home Depot. Since I moved the shop I need to get a few more, they come in packs of 4 and are 2 foot square. Yes the vacuum is good but also a pliers to pull out chips helps.
Carl,
As you probably noticed stuff fly's in the shop. At work I use a divider but stuff goes over the top and under the bottom, and shoes track it all over. Not that you are working with long strings of zink, but...The scrubby mats sound like a great idea.
Art

I tell you what Art....they work nice.   I'm much more comfortable out there...even with a compromised leg...Amazing how hard that floor gets

Dave
"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Offline Vixen

  • Full Member
  • *****
  • Posts: 3075
  • Hampshire UK
Re: Getting some antifatique mats today
« Reply #26 on: July 29, 2018, 10:53:51 PM »
Hello Dave,

I have those anti fatigue mats all over my workshop floor. I also have those mats with holes in front of each machine. The holy mats let the swarf bits fall through and they also act like shoe wipers. The combination is very easy on the feet and knees.

I also have a favourite pair of foam soled sandals which are in effect 'anti fatigue mat' shoes. Not much toe protection with sandals though.

Mike
It is the journey that matters, not the destination

Sometimes, it can be a long and winding road

Offline kev

  • Full Member
  • ****
  • Posts: 267
  • Portsmouth UK
Re: Getting some antifatique mats today
« Reply #27 on: July 29, 2018, 11:23:52 PM »
been looking at those interlinking mats in my "B&Q" hardware store Dave and seeing yours convinced me, the rubber mats I laid a few years ago are so bad and worn they are becoming dangerous plus my old legs and feet need some help

Offline Tennessee Whiskey

  • Full Member
  • *****
  • Posts: 3781
  • Springfield, Tennessee. USA
Re: Getting some antifatique mats today
« Reply #28 on: July 29, 2018, 11:34:21 PM »
You’ll love them. I think these are a bit softer than the ones with holes.

Cletus

Offline steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 12697
  • Central Massachusetts, USA
Re: Getting some antifatique mats today
« Reply #29 on: July 30, 2018, 12:51:39 AM »
YUP...I'm putting them all over the shop....though not now.

I'm going to blank that rod...maybe tonight....or at least this week.

Dave
"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Offline ShopShoe

  • Full Member
  • ****
  • Posts: 462
  • Central Iowa, Central USA
Re: Getting some antifatique mats today
« Reply #30 on: July 30, 2018, 02:10:54 PM »
Shoes?,

You can't absolutely see it in my avatar, but why I chose this handle and what I show in the picture is that the soft soles of the shoes are absolutely full of chips stuck into the soft soles. And then I refinished the hardwood floors in the house and ....

I have not so far got the mats as I like to sweep the floor with a broom a lot. If I keep the dust and whatever swept up, then I can sweep up the chips after a session and save them for sale/recycling.

My leaving-the-shop ritual is: Sweep up Chips and make a nice small pile on the floor, Take stiff-bristle brush and get chips out of shoes onto floor, sweep into pile, use bench brush and dust pan to pick up pile for chip recycling or trash, depending on what I've been up to.

Then I have old doormats both inside and outside shop door which get vacuumed every so often.

Works for me at this point in time.

ShopShoe

Offline Dave Otto

  • Full Member
  • *****
  • Posts: 4693
  • Boise, Idaho USA
    • Photo Bucket
Re: Getting some antifatique mats today
« Reply #31 on: August 05, 2018, 03:47:24 PM »
Here are a couple pictures of my new mill mat. The first pictures show the old set up. The larger thin mat was given to me by a friend many years ago; the a few years ago my brother gave me the super squishy one. While it was pretty comfy the swarf ended up destroying it.

I'm really happy with the new one, it is about the same height as the duck board in front of my lathe. The swarf sweeps and/or vacuums up easily.

Dave

Offline steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 12697
  • Central Massachusetts, USA
Re: Getting some antifatique mats today
« Reply #32 on: August 12, 2018, 11:56:10 PM »
I'm gonna try this for the lathe and the mills....the office chair is too low for any of the machines really

https://www.mcmaster.com/#4908t36/=1e4nxh1

Be here Tuesday.....    I'm going to start at 32"

Its apparent, that given the situation with the right leg/knee....something needs to change....

Dave
"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Offline zeeprogrammer

  • Full Member
  • *****
  • Posts: 6811
  • West Chester, PA, USA
Re: Getting some antifatique mats today
« Reply #33 on: August 13, 2018, 12:09:30 AM »
All right. Enough of this.

All this talk about anti-fatigue mats...great.
But they're no good if they're not used.  ;D

Get in that shop!!!

Take some pics!!!

 :stickpoke: :stickpoke: :stickpoke:
Carl (aka Zee) Will sometimes respond to 'hey' but never 'hey you'.
"To work. To work."
Zee-Another Thread Trasher.

Offline Dave Otto

  • Full Member
  • *****
  • Posts: 4693
  • Boise, Idaho USA
    • Photo Bucket
Re: Getting some antifatique mats today
« Reply #34 on: August 13, 2018, 12:18:31 AM »
I hope that works out for you Dave.

Dave

Offline steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 12697
  • Central Massachusetts, USA
Re: Getting some antifatique mats today
« Reply #35 on: August 13, 2018, 12:19:39 AM »
All right. Enough of this.

All this talk about anti-fatigue mats...great.
But they're no good if they're not used.  ;D

Get in that shop!!!

Take some pics!!!

 :stickpoke: :stickpoke: :stickpoke:

Half hour at a time Zee.....
"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Offline steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 12697
  • Central Massachusetts, USA
Re: Getting some antifatique mats today
« Reply #36 on: August 15, 2018, 02:10:30 AM »
The Stool is in!   My son put it together while I was at work...got to sit in it at the machines tonight for a spell..It's just a touch high for the Aciera,   Perfect for the Clausing Mill, and about perfect for the Southbend.   I think i'm good there.  I think I'd like to have the back further back..   So I'll put some spacers on that and adjust....

Progress!

Dave
"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Offline steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 12697
  • Central Massachusetts, USA
Re: Getting some antifatique mats today
« Reply #37 on: August 15, 2018, 02:12:06 AM »
Oh  and the quality of this stool is very good.   All welded steel frame painting a pleasant green with a natural Birch wood seat and back.  Decent hardware ect.

Worth what they asked for it I think....
https://www.mcmaster.com/#4908t36/=1e4nxh1



Dave
"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal