Welcome to ModelEngineMaker !If you have problems registering or logging in, please use the contact menu option to request assistance.
There is nothing like a dodgy deal in a carpark
Keep Eric away from the sticky wotsits he scoffed most of them last time.
Why are you not stopping for the 3 day's
I haven't seen any of those drawings yet
Are they psychic then, I could not build a crank from that drawing even if I wanted to. You know I prefer to make engines that will run
Jo my couple of queries on the conrods were that the 14mm dimension does not seem to relate to a feature on either elevation and that the 16mm dimension is to the junction of the vertical side and the roundover, as the radius is not shown the depth of both forks is not defined.
PS Did I hear your pension Casting fund has taken a dive today
Quote from: Jasonb on July 22, 2018, 07:15:05 AMThe dimension is from the centre of the crank to the top surface of the fork - We know these lengths do not foul the skirts. The thickness of the flat on the fork is given.That is what I had assumed they were meant to be but it is not where the dimension lines go to as far as I can see
The dimension is from the centre of the crank to the top surface of the fork - We know these lengths do not foul the skirts. The thickness of the flat on the fork is given.That is what I had assumed they were meant to be but it is not where the dimension lines go to as far as I can see
Ok Dave Maybe we will see you at the midlands show in a couple of months Jo
The Great Hun-Yun Run ( 2018 Edition ) in a couple of weeks or so.
Why do they feel the need to stop running it?Colin