Author Topic: Handy lathe tools  (Read 1199 times)

Offline dvbydt

  • Full Member
  • ****
  • Posts: 86
Handy lathe tools
« on: May 08, 2018, 03:58:04 PM »
Having made my little grinder, the first tools I made were these multipurpose toolbits.
One for brass and plastic and one for steel and aluminium.
80% of the work I do on the lathe in either steel or brass and one these two tools is my first choice and saves me scrabbling about in the box of previously made single ended tools.

Ian

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal