Engines > Restoration of Model Engines
A Cretors horizontal wobbler
tinkerer:
Let's see if this new resizing software works for this site. This is a Cretors horizontal wobbler engine a friend of mine owns
tinkerer:
A couple more of the same engine. I'd like to get my hands on it & restore it.
tinkerer:
I don't think anyone makes a copy of this one. Myers only has the vertical one & two sixes of the horizontal #6.
b.lindsey:
I haven't seen castings for this one either, but from the looks of it, it could be done from bar stock and fabricated to look as if from castings. The hardest part would be that little clown head attached to the base ;D
Bill
hitnmiss49:
I have a set of castings for this engine. I don't know who made the castings as I purchased them on ebay about a year ago. The base plate is cast in aluminum and the rest of the parts including the flywheel are cast in brass. There were not any blueprints included with the castings. When I get around to working on it I'll have to make cad drawings of it so I can get all the dimensions correct.
Lonnie
Navigation
[0] Message Index
[#] Next page
Go to full version