Author Topic: My take on a Kingway tool...  (Read 7016 times)

Offline 10KPete

  • Full Member
  • ****
  • Posts: 1606
  • Nordland, WA, USA
My take on a Kingway tool...
« on: January 01, 2018, 09:04:57 PM »
Needed to make one to continue straightening out my Benchmaster mill...

Craftsman, Tinkerer, Curious Person.
Retired, finally!
SB 10K lathe, Benchmaster mill. And stuff.

Offline crueby

  • Full Member
  • *****
  • Posts: 18554
  • Rochester NY
Re: My take on a Kingway tool...
« Reply #1 on: January 01, 2018, 09:10:03 PM »
So, what the swarf is it?? What's it do?

Hope its not like a Henway... !

Offline 10KPete

  • Full Member
  • ****
  • Posts: 1606
  • Nordland, WA, USA
Re: My take on a Kingway tool...
« Reply #2 on: January 01, 2018, 09:43:56 PM »
It's used to facilitate making relative measurements of the parallel-ness of machine ways. Thusly:

I think this picture comes from J. Tiers...
Craftsman, Tinkerer, Curious Person.
Retired, finally!
SB 10K lathe, Benchmaster mill. And stuff.

Offline crueby

  • Full Member
  • *****
  • Posts: 18554
  • Rochester NY
Re: My take on a Kingway tool...
« Reply #3 on: January 01, 2018, 10:14:27 PM »
Ah! Thanks!!

Offline b.lindsey

  • Global Moderator
  • Full Member
  • *****
  • Posts: 13860
  • Dallas, NC, USA
    • Workbench-Miniatures
Re: My take on a Kingway tool...
« Reply #4 on: January 01, 2018, 10:45:10 PM »
Chris, there are some you tube videos as well. I had to Google it also.

Bill

Offline crueby

  • Full Member
  • *****
  • Posts: 18554
  • Rochester NY
Re: My take on a Kingway tool...
« Reply #5 on: January 01, 2018, 11:05:25 PM »
Chris, there are some you tube videos as well. I had to Google it also.

Bill
Kingway does sound better than the Parallelisitynessometer. Better, but not as catchy.


First day in the new year, and I've already learned something new, really takes the pressure off the year!   :Lol:

Offline 10KPete

  • Full Member
  • ****
  • Posts: 1606
  • Nordland, WA, USA
Re: My take on a Kingway tool...
« Reply #6 on: January 02, 2018, 12:23:16 AM »
Now you can take the rest of the week off.... :lolb: :mischief:

I've got the bottom for the wood box in the mill now. I like tools to have boxes.  :old:

Happy new year!

Pete
Craftsman, Tinkerer, Curious Person.
Retired, finally!
SB 10K lathe, Benchmaster mill. And stuff.

Online steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 12697
  • Central Massachusetts, USA
Re: My take on a Kingway tool...
« Reply #7 on: January 02, 2018, 11:38:36 AM »
I would love to see it being used in anger!   Make sure you take us along Pete.   8)

Dave
"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Offline stvy

  • Full Member
  • ****
  • Posts: 37
Re: My take on a Kingway tool...
« Reply #8 on: January 07, 2018, 09:10:42 PM »
Pete,


Do you have a solution/design for mounting the vials? I am also at the early stages in making a kingway.

Thanks,
Steve

Offline 10KPete

  • Full Member
  • ****
  • Posts: 1606
  • Nordland, WA, USA
Re: My take on a Kingway tool...
« Reply #9 on: January 07, 2018, 09:54:39 PM »
Pete,


Do you have a solution/design for mounting the vials? I am also at the early stages in making a kingway.

Thanks,
Steve

I have no levels on the device. They just add to the clutter and weight. I don't care if the thing is level. I know Richard King has shown level vials on the device, as have others, but I prefer to do any level checking separately.

Pete
Craftsman, Tinkerer, Curious Person.
Retired, finally!
SB 10K lathe, Benchmaster mill. And stuff.

Offline 10KPete

  • Full Member
  • ****
  • Posts: 1606
  • Nordland, WA, USA
Re: My take on a Kingway tool...
« Reply #10 on: January 07, 2018, 09:58:02 PM »
I would love to see it being used in anger!   Make sure you take us along Pete.   8)

Dave

I hadn't thought about a 'build log', Dave, but that wouldn't be a bad idea. Not building the device but maybe a bit on using it in anger! It might be a couple of months though...

Pete
Craftsman, Tinkerer, Curious Person.
Retired, finally!
SB 10K lathe, Benchmaster mill. And stuff.

Offline stvy

  • Full Member
  • ****
  • Posts: 37
Re: My take on a Kingway tool...
« Reply #11 on: January 07, 2018, 10:02:32 PM »
Pete,


Do you have a solution/design for mounting the vials? I am also at the early stages in making a kingway.

Thanks,
Steve


I have no levels on the device. They just add to the clutter and weight. I don't care if the thing is level. I know Richard King has shown level vials on the device, as have others, but I prefer to do any level checking separately.

Pete


Pete,

The vials are to measure twist and how much out of "parallel " the ways that the ball and 2 point foot are resting on as you traverse the tool along the ways. I.e. they measure the relative position of the way. They wont' measure necessarily if the 2 ways are "level". You would need to calibrate it in absolute terms for that.

Steve
« Last Edit: January 07, 2018, 10:06:41 PM by stvy »

Offline 10KPete

  • Full Member
  • ****
  • Posts: 1606
  • Nordland, WA, USA
Re: My take on a Kingway tool...
« Reply #12 on: January 07, 2018, 11:23:14 PM »
Yes, that's right, Steve. But I'm not surveying a machine, I'm straightening it. The open flats are done first with the master flat then the dovetails. So any defect in the plane of the flats is gone by the time I need the Kingway to look at the dovetails.
Vials can be added at any time. Maybe the next owner...

Pete
Craftsman, Tinkerer, Curious Person.
Retired, finally!
SB 10K lathe, Benchmaster mill. And stuff.

Offline stvy

  • Full Member
  • ****
  • Posts: 37
Re: My take on a Kingway tool...
« Reply #13 on: January 08, 2018, 06:08:53 PM »
Pete,

Fair enough. It would be interesting to see pictures of the castings. Please do post about the work if you don't mind.

Thanks,
Steve

Offline 10KPete

  • Full Member
  • ****
  • Posts: 1606
  • Nordland, WA, USA
Re: My take on a Kingway tool...
« Reply #14 on: January 08, 2018, 06:25:16 PM »
Steve, look at the second picture of this thread. While that's not my Benchmaster, it's the same and shows the Kingway being used to measure the column dove tail.

Pete
Craftsman, Tinkerer, Curious Person.
Retired, finally!
SB 10K lathe, Benchmaster mill. And stuff.

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal