Author Topic: UK source of flats for crankshafts ?  (Read 1432 times)

Offline Boo

  • Full Member
  • ****
  • Posts: 13
UK source of flats for crankshafts ?
« on: December 27, 2017, 02:02:39 PM »
Hi,

Not really an T&M question but couldn't see a better forum,  please feel free to move this thread if one exists.

I want to find a source of model engineering quantities of flat bar sections of high tensile steel suitable for crankshafts, like eg EN8 or EN16 or EN24 etc.  I can find round bar easily enough but really don't want the extra hassle of milling it flat first if I can avoid it.

Also,  for model IC engines,  can anyone tell me what grades of steel are currently considered best ?

As stated, I'm in the UK,

Boo

Offline Ramon Wilson

  • Full Member
  • ****
  • Posts: 1942
  • Suffolk in the UK
Re: UK source of flats for crankshafts ?
« Reply #1 on: December 27, 2017, 02:38:37 PM »
Hi Boo,

I'm surprised that finding En24t flat bar is so difficult. I've just tried and couldn't find anything in the usual sources. What I did find was this company - new to me that appears to have very reasonable prices for En24t round - in bright as well so will be giving them a try this year. https://jenkinssteelonlinemetal.co.uk/product-category/en24t-bright/

When you ask what grades are best - what function are you thinking of? and what type of engine - I always use En24t for crankshafts on my diesel engines.

I've used various materials for liners - chrome steel, cast, etc but the best combination for all round use - both machining and running has been leaded En1a and cast as Liner and Piston combination

Sorry I can't be of more help on the flat bar but hope that's of some use to you

Tug
"I ain't here for the long time but I am here for a good time"
(a very apt phrase - thanks to a well meaning MEM friend)

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal