Author Topic: Cabin Fever next month  (Read 12887 times)

Online crueby

  • Full Member
  • *****
  • Posts: 8784
  • Rochester NY
Re: Cabin Fever next month
« Reply #30 on: January 05, 2018, 01:31:40 AM »
Looks like the weather is going to be ok with no SNOW. Mid low 40s with rain.  Looking forward to seeing everyone.

Dave
I think I can remember temperatures in the 40's... been a while here! The next two days are below zero (F) for a HIGH temperature! I'm staying in the shop (which is in the house) for that.

Offline jclouden

  • Full Member
  • ****
  • Posts: 23
  • Front Royal, VA USA
Re: Cabin Fever next month
« Reply #31 on: January 05, 2018, 01:54:40 AM »
Looking forward to Cabin Fever.  This will be my 3rd and will be nice to meet some of you.  I am just finishing my 2nd engine and maybe next year l'll bring some for display.  I'll be there Friday & Saturday.
Jon


Sent from my SM-T700 using Tapatalk


Offline Myrickman

  • Full Member
  • ****
  • Posts: 261
Re: Cabin Fever next month
« Reply #32 on: January 08, 2018, 09:54:28 AM »
Three to one odds I'll be there. Which room is the group in? Large hall? Probably bring the Atkinson or perhaps a steam engine.

Offline sshire

  • Full Member
  • *****
  • Posts: 3044
    • LS Editions
Re: Cabin Fever next month
« Reply #33 on: January 08, 2018, 07:59:10 PM »
Reading between the lines and the cookie and weather comments (looks like 50's) this is who I have for space in the MEM area.

Me
Cheepo45
Dreeves
Crueby
Kvom
Ron Ginger (are you with us or the Downeasters)
Art
Myrickman

Anyone else? Speak up before Thurs morning.
Best,
Stan

Offline cheepo45

  • Full Member
  • ****
  • Posts: 154
Re: Cabin Fever next month
« Reply #34 on: January 08, 2018, 09:22:15 PM »
Thanks, Stan!
My anticipation is building - looking forward to seeing everyone!
 Scott (cheepo45)

Online crueby

  • Full Member
  • *****
  • Posts: 8784
  • Rochester NY
Re: Cabin Fever next month
« Reply #35 on: January 08, 2018, 09:44:08 PM »
And thanks for ordering up some great travelling weather for Thursday! Hope it holds through the weekend for us. Then it can dump again Tuesday...!

Offline 90LX_Notch

  • Full Member
  • ****
  • Posts: 1405
  • North Eastern Pennsylvania USA
    • YouTube Channel
Re: Cabin Fever next month
« Reply #36 on: January 08, 2018, 09:47:08 PM »

Against all odds it looks good for me.  The weather gods are actually going to give me a break.   I only need my usual amount of space.  Thanks Stan.

-Bob
Proud Member of MEM

My Engine Videos on YouTube-
http://www.youtube.com/user/Notch90usa/videos

Offline 90LX_Notch

  • Full Member
  • ****
  • Posts: 1405
  • North Eastern Pennsylvania USA
    • YouTube Channel
Re: Cabin Fever next month
« Reply #37 on: January 08, 2018, 11:26:07 PM »
Does anyone know what the air pressure is at the tables?  I just assembled my Elmer's Tiny display and all three of them run fine at 18 psi.  The only killer is that it takes over 30 psi to get the real small one started.

-Bob
Proud Member of MEM

My Engine Videos on YouTube-
http://www.youtube.com/user/Notch90usa/videos

Offline ART

  • Full Member
  • ****
  • Posts: 26
Re: Cabin Fever next month
« Reply #38 on: January 08, 2018, 11:30:00 PM »
Glad the weather will be with us, and you will be able to make it Bob. I will have my magnifying glass
 cleaned and ready to see your engines. Every body have safe travels. Earl

Online kvom

  • Full Member
  • ****
  • Posts: 1983
Re: Cabin Fever next month
« Reply #39 on: January 09, 2018, 12:09:12 AM »
Does anyone know what the air pressure is at the tables?  I just assembled my Elmer's Tiny display and all three of them run fine at 18 psi.  The only killer is that it takes over 30 psi to get the real small one started.

-Bob

Last year it was around 55 psi

Offline 90LX_Notch

  • Full Member
  • ****
  • Posts: 1405
  • North Eastern Pennsylvania USA
    • YouTube Channel
Re: Cabin Fever next month
« Reply #40 on: January 09, 2018, 12:11:29 AM »
Thanks kvom.

-Bob
Proud Member of MEM

My Engine Videos on YouTube-
http://www.youtube.com/user/Notch90usa/videos

Offline 90LX_Notch

  • Full Member
  • ****
  • Posts: 1405
  • North Eastern Pennsylvania USA
    • YouTube Channel
Re: Cabin Fever next month
« Reply #41 on: January 09, 2018, 12:13:51 AM »
GLad that you will be there again  Earl.  I need to remember to bring my magnifying glass for the people.

-Bob
Proud Member of MEM

My Engine Videos on YouTube-
http://www.youtube.com/user/Notch90usa/videos

Online crueby

  • Full Member
  • *****
  • Posts: 8784
  • Rochester NY
Re: Cabin Fever next month
« Reply #42 on: January 09, 2018, 12:39:43 AM »
Does anyone know what the air pressure is at the tables?  I just assembled my Elmer's Tiny display and all three of them run fine at 18 psi.  The only killer is that it takes over 30 psi to get the real small one started.

-Bob

Last year it was around 55 psi
I picked up a replacement air-compressor regulator to put in line on the manifold on my engines, figure that should work out to reduce whatever the house pressure is (anything like house wine? ).

Starting to make the pile-o-stuff to pack into the car Thursday morning...

Online kvom

  • Full Member
  • ****
  • Posts: 1983
Re: Cabin Fever next month
« Reply #43 on: January 09, 2018, 03:01:01 AM »
The air outlets all have stopcock valves which are decent at cutting down the pressure if you don't have your own regulator.

Offline RonGinger

  • Full Member
  • ****
  • Posts: 238
  • Boothbay Maine USA
    • Pleasant Cove Models
Re: Cabin Fever next month
« Reply #44 on: January 09, 2018, 01:26:42 PM »
I am bringing a boat this year- a kit I bought at the show last year. So I will be really scattered. If we get the same tables as last year Id  like the last spot on the MEM table at the end of the NEMES line. that kind of puts me in both groups. I will be in there first thing Friday morning and marking out the tables for NEMES.