Welcome to ModelEngineMaker !If you have problems registering or logging in, please use the contact menu option to request assistance.
Try Marv's recommended fix that he posted today tor firefox. It just worked for me.I did something very similar to what Chuck did when bending the 1/16" OD copper tubes for the half scale Rudy's Radial build and it worked perfectly for me.Bill
Quote from: b.lindsey on September 01, 2017, 07:08:24 PMTry Marv's recommended fix that he posted today tor firefox. It just worked for me.I did something very similar to what Chuck did when bending the 1/16" OD copper tubes for the half scale Rudy's Radial build and it worked perfectly for me.BillNot working for me I'm on FF 55.0.2 says for 57+ I'm on 53.30 and it works just fine for me. Debian Jessie, TDE desktop.What level do you have?D.
Some years ago I designed and built a versatile bender that would bend any tube, up to 1/8" steel strip and sq section, provided a simple former was made for each application. It was well received on the MECH forum, and was published as a paid article in Model Engineers Workshop magazine. I've got a pdf somewhere of the drawing if anyone wants to have a go at it!John