Author Topic: Bristol Model Engineering Show 2017  (Read 7915 times)

Offline Chipmaster

  • Full Member
  • ****
  • Posts: 988
Bristol Model Engineering Show 2017
« on: August 19, 2017, 03:29:57 PM »
Here's a lot of pictures taken yesterday.
50cc Five Cylinder Sleeve Valve Radial by Andy, on Flickr
Anzani Y Type [1] by Andy, on Flickr
Anzani Y Type [2] by Andy, on Flickr
Armstrong Siddeley Lynx 4 by Andy, on Flickr
Bentley [3] by Andy, on Flickr
Bentley BR2 by Andy, on Flickr
Bristol Mercury [1] by Andy, on Flickr
Bristol Mercury [2] by Andy, on Flickr

DeHavilland Gypsy by Andy, on Flickr

ENV Type F V8 Aero Engine [1] by Andy, on Flickr
ENV Type F V8 Aero Engine [2] by Andy, on Flickr
ENV Type F V8 Aero Engine [3] by Andy, on Flickr
ENV Type F V8 Aero Engine [4] by Andy, on Flickr
ENV Type F V8 Aero Engine [5] by Andy, on Flickr
ENV Type F V8 Aero Engine [6] by Andy, on Flickr
ENV Type F V8 Aero Engine [7 by Andy, on Flickr
ENV Type F V8 Aero Engine [8] by Andy, on Flickr
ENV Type F V8 Aero Engine [9] by Andy, on Flickr
ENV Type F V8 Aero Engine [10] by Andy, on Flickr

Fifth Scale Huubard  Stroke Marine Engine by Andy, on Flickr
Freelance Mill ENgine by Andy, on Flickr
Gnome [1] by Andy, on Flickr
Gnome [4] by Andy, on Flickr
Gnome [7] by Andy, on Flickr

Hypocycloidal Engine [1] by Andy, on Flickr
Hypocycloidal Engine [2[] by Andy, on Flickr

Kitteo & Brotherhood Beam Engine (1) by Andy, on Flickr
Kitteo & Brotherhood Beam Engine (3) by Andy, on Flickr
Kitteo & Brotherhood Beam Engine (2) by Andy, on Flickr

Monitor by Andy, on Flickr
Overcrank Engine [1] by Andy, on Flickr
Overcrank Engine [2] by Andy, on Flickr
Overcrank Engine [3] by Andy, on Flickr
Overcrank Engine [5] by Andy, on Flickr
Overcrank Engine [6] by Andy, on Flickr

P1060776 (2) by Andy, on Flickr
P1060778 (2) by Andy, on Flickr
P1060779 by Andy, on Flickr

P1060783 by Andy, on Flickr
P1060802 by Andy, on Flickr
P1060807 by Andy, on Flickr
P1060810 by Andy, on Flickr

P1060812 by Andy, on Flickr
P1060823 by Andy, on Flickr
P1060825 (2) by Andy, on Flickr
P1060826 by Andy, on Flickr
P1060828 by Andy, on Flickr

P1060829 by Andy, on Flickr
P1060830 by Andy, on Flickr
P1060831 by Andy, on Flickr

P1060832 by Andy, on Flickr
P1060833 by Andy, on Flickr
P1060838 by Andy, on Flickr

I will add more picture shortly.

Andy
« Last Edit: August 19, 2017, 06:18:08 PM by Chipmaster »

Offline Chipmaster

  • Full Member
  • ****
  • Posts: 988
Re: Bristol Model Engineering Show 2017
« Reply #1 on: August 19, 2017, 03:38:50 PM »
Another batch of pictures...

P1060849 by Andy, on Flickr
P1060850 (2) by Andy, on Flickr
P1060852 by Andy, on Flickr
P1060854 by Andy, on Flickr
P1060855 by Andy, on Flickr
P1060857 by Andy, on Flickr
P1060860 by Andy, on Flickr
P1060861 by Andy, on Flickr
P1060863 by Andy, on Flickr
P1060864 by Andy, on Flickr

Offline Jo

  • Administrator
  • Full Member
  • *****
  • Posts: 15293
  • Hampshire, england.
Re: Bristol Model Engineering Show 2017
« Reply #2 on: August 19, 2017, 03:41:03 PM »
 8) thanks Andy,

 I see the ICEBG were there with their engines  :embarassed:

Not sure which one my supplier took  :noidea:

Jo
Enjoyment is more important than achievement.

Offline Chipmaster

  • Full Member
  • ****
  • Posts: 988
Re: Bristol Model Engineering Show 2017
« Reply #3 on: August 19, 2017, 03:45:55 PM »
Hi Jo,

I have more pictures to add but I've been held up by Flickr going down a few minutes ago.

Who or what do you mean by 'my supplier' ?

Andy

Offline Chipmaster

  • Full Member
  • ****
  • Posts: 988
Re: Bristol Model Engineering Show 2017
« Reply #4 on: August 19, 2017, 03:53:16 PM »
Back in business again.....

P1060866 by Andy, on Flickr
P1060867 by Andy, on Flickr
P1060868 by Andy, on Flickr
P1060902 (2) by Andy, on Flickr
P1060904 by Andy, on Flickr
P1060914 by Andy, on Flickr
P1060915 by Andy, on Flickr
Pioneer by Andy, on Flickr


Single Cylinder Mill Engine with Corliss Valve [1] by Andy, on Flickr
Single Cylinder Mill Engine with Corliss Valve [2] by Andy, on Flickr
Single Cylinder Mill Engine with Corliss Valve [3] by Andy, on Flickr
Single Cylinder Mill Engine with Corliss Valve [4] by Andy, on Flickr
Stuart Beam Engine by Andy, on Flickr
Stuart Steam Hammer by Andy, on Flickr
Twin Victoria [1] by Andy, on Flickr
Twin Victoria [2] by Andy, on Flickr
Twin Victoria [3] by Andy, on Flickr
Twin Victoria [4] by Andy, on Flickr
Twin Victoria [5] by Andy, on Flickr

                                                            THE END

Offline Jo

  • Administrator
  • Full Member
  • *****
  • Posts: 15293
  • Hampshire, england.
Re: Bristol Model Engineering Show 2017
« Reply #5 on: August 19, 2017, 03:59:19 PM »
Who or what do you mean by 'my supplier' ?

Eric Offen... who also is the judge for the model engines at the International Model Engineering show  8)

He normally has a habit of just taking a couple of small IC engines which only the knowledgeable collector would realise how significant they are.

Jo
Enjoyment is more important than achievement.

Offline Chipmaster

  • Full Member
  • ****
  • Posts: 988
Re: Bristol Model Engineering Show 2017
« Reply #6 on: August 19, 2017, 04:40:08 PM »
Thank you Jo.
Being outside the Inner Circle I don't know who some of these aliases refer to.  :shrug:

Andy  :LittleAngel:

Online Jasonb

  • Full Member
  • *****
  • Posts: 9464
  • Surrey, UK
Re: Bristol Model Engineering Show 2017
« Reply #7 on: August 19, 2017, 04:51:20 PM »


Who or what do you mean by 'my supplier' ?

Andy

The chap on the right in the second photo, one without the braces

Thanks for those Andy, will have a better look later as I have just got in from seeing a man about a dog but looks like one of my engines was there.

Offline Chipmaster

  • Full Member
  • ****
  • Posts: 988
Re: Bristol Model Engineering Show 2017
« Reply #8 on: August 19, 2017, 05:28:39 PM »
Hi Jason,
Yes the Monitor I presume, I had a pleasant chat with the owner. He had set up his display minutes before we entered the show, I think he said he had travelled from Ireland that very morning  :praise2:

Andy

Online Jasonb

  • Full Member
  • *****
  • Posts: 9464
  • Surrey, UK
Re: Bristol Model Engineering Show 2017
« Reply #9 on: August 19, 2017, 05:40:26 PM »
That'll be Dave from the Emerald Isle, did he have it running, he usually fires them up. May also of had is Hubbard marine engine there with additional detailing.

Online Jasonb

  • Full Member
  • *****
  • Posts: 9464
  • Surrey, UK
Re: Bristol Model Engineering Show 2017
« Reply #10 on: August 19, 2017, 05:53:54 PM »
There are some other photos if you scroll down this Facebook page that was posted on ME Forum, may be of interest as it shows some of the other aspects of teh hobby, I like the weathering on that CAT Dozer bucket and the part built crane/excavator towards the end.

https://m.facebook.com/profile.php?id=167287926697418&ref=stream

Offline Stuart

  • Full Member
  • ****
  • Posts: 1785
  • Tilchestune UK
Re: Bristol Model Engineering Show 2017
« Reply #11 on: August 19, 2017, 06:01:14 PM »
Jason
Is that link ok it takes me to thornby leisure centre
My aim is for a accurate part with a good finish

Offline Bluechip

  • Full Member
  • ****
  • Posts: 1007
  • Derbyshire
Re: Bristol Model Engineering Show 2017
« Reply #12 on: August 19, 2017, 06:12:17 PM »
It invites you to join @rsebook by the looks of it.

I don't qualify, I can do joined up writing ..   :thinking:

Dave

Offline Stuart

  • Full Member
  • ****
  • Posts: 1785
  • Tilchestune UK
Re: Bristol Model Engineering Show 2017
« Reply #13 on: August 19, 2017, 06:20:01 PM »
Thanks Dave at least it’s not this end

I cannot do simple words with out a spell checker

Stuart
My aim is for a accurate part with a good finish

Offline Chipmaster

  • Full Member
  • ****
  • Posts: 988
Re: Bristol Model Engineering Show 2017
« Reply #14 on: August 19, 2017, 06:31:55 PM »
Hi Jason, he had his Hubbard 2 Stroke marine engine, a Pioneer, a Monitor and a water pump on display. Unfortunatly I didn't see them running.

However, we did see some of the large model aero engines running outside.

Andy

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal