Author Topic: Dual Hypercube Evolution Build  (Read 286 times)

Offline bruedney

  • Full Member
  • ****
  • Posts: 372
  • Wellington, New Zealand
Dual Hypercube Evolution Build
« on: July 11, 2017, 09:37:10 AM »
So James (Joco) and I are embarking on a new project

The building of a Hypercube Evolution coreXY 3D printer each


Because we have engineering machines already we have decided to build some parts rather than buy them in from overseas.

The last two nights for me have been spent make the Hotends based on the E3D hotend design E3D online



These things are quite small (16mm x 23mm x 11.5mm)

Hopefully this might be of interest to others on this site.

Cheers

Bruce
‘Results! Why man, I have gotten a lot of results. I know several thousand things that won’t work.’ — Thomas Alva Edison

Offline Joco

  • Full Member
  • ****
  • Posts: 166
Re: Dual Hypercube Evolution Build
« Reply #1 on: July 11, 2017, 10:50:40 AM »
And I've been busy printing parts with my old reprap mendel.

« Last Edit: July 12, 2017, 06:52:14 AM by Joco »
James
Wellington - NZ

Offline wagnmkr

  • Full Member
  • ****
  • Posts: 542
  • Lindsay, Ontario, Canada
Re: Dual Hypercube Evolution Build
« Reply #2 on: July 11, 2017, 11:57:12 AM »
This will be interesting to follow as I have the files and some of the parts for this one.

Tom
I was cut out to be rich ... but ... I was sown up all wrong!