Author Topic: Second Engine Elmer's Number 14 (Read 2100 times)

Pthunberg · « **on:** June 18, 2017, 01:45:19 AM »

All,

Thank you for all the fascinating and informative posts. I am learning so much reading the build logs and tips. Just finished my second engine. Had a few challenges and learned a lot along the way. I have a new respect for turning small skinny things.

[youtube1]https://youtu.be/I2_Kk3a4WUc[/youtube1]

Paul

b.lindsey · « **Reply #1 on:** June 18, 2017, 01:54:44 AM »

Well done Paul. I like what you did with the air inlet tube also. This is still one of my favorites of Elmer's designs.

Bill

90LX_Notch · « **Reply #2 on:** June 18, 2017, 04:06:15 AM »

That is a very smooth running engine Paul. Congratulations on job well done.

-Bob

gary.a.ayres · « **Reply #3 on:** June 30, 2018, 09:49:15 AM »

Very nice. A jewel...

bent · « **Reply #4 on:** July 02, 2018, 05:27:42 PM »

That's some fine machining there.

zeeprogrammer · « **Reply #5 on:** July 02, 2018, 06:49:31 PM »

I missed the post but glad I found it.

A very nice job on that engine!

And I loved the family shot. Always nice to see.

News:

Author Topic: Second Engine Elmer's Number 14 (Read 2100 times)

Pthunberg

Second Engine Elmer's Number 14

b.lindsey

Re: Second Engine Elmer's Number 14

90LX_Notch

Re: Second Engine Elmer's Number 14

gary.a.ayres

Re: Second Engine Elmer's Number 14

bent

Re: Second Engine Elmer's Number 14

zeeprogrammer

Re: Second Engine Elmer's Number 14