Welcome to ModelEngineMaker !If you have problems registering or logging in, please use the contact menu option to request assistance.
Very interesting! That would make an interesting variant on the usual eccentric on the crankshaft to model.We need to send Julius there with a tape measure and a laptop...!
Quote from: crueby on June 10, 2017, 08:14:53 PMVery interesting! That would make an interesting variant on the usual eccentric on the crankshaft to model.We need to send Julius there with a tape measure and a laptop...!DMC do plans for a similar arrangement,same basic set up just the trunk guide / bearing pedestal that is different really. You see quite a few of this type of engine modeled in Germany.http://www.dampfundmehr.de/im-bau/ventil_masch/ventil_5.htm
http://dampfmodellbauer.de/webshop/index.php?cPath=1_2_17The former owner, who has left this world a couple of years ago, was the publisher of a Germany model engine magazin.