Author Topic: Finaly get started  (Read 11864 times)

Offline Tennessee Whiskey

  • Full Member
  • *****
  • Posts: 3781
  • Springfield, Tennessee. USA
Re: Finaly get started
« Reply #15 on: June 27, 2017, 09:42:59 PM »
I didn't understand a word of that, but, the parts look great  :cheers:

Cletus

Edit: I did get the slow boat to China part  :lolb:

Offline 10KPete

  • Full Member
  • ****
  • Posts: 1606
  • Nordland, WA, USA
Re: Finaly get started
« Reply #16 on: June 27, 2017, 11:45:13 PM »
If a picture is worth a thousand words, then those words never stood a chance....

 ^-^

Beautiful parts. Make it run!

 :cheers:

Pete
Craftsman, Tinkerer, Curious Person.
Retired, finally!
SB 10K lathe, Benchmaster mill. And stuff.

Offline crankshafter

  • Full Member
  • ****
  • Posts: 127
  • Molde, Norway
Re: Finaly get started
« Reply #17 on: June 28, 2017, 10:24:32 AM »
I didn't understand a word of that, but, the parts look great  :cheers:

Cletus

Edit: I did get the slow boat to China part  b:
Cletus.
Just talking about tthe wether😉
Best Regards CS

Sent fra min SM-G870F via Tapatalk

"I cut it twice, and it's still to short"!!??">#%

Offline Admiral_dk

  • Full Member
  • *****
  • Posts: 3752
  • Søften - Denmark
Re: Finaly get started
« Reply #18 on: June 28, 2017, 12:12:40 PM »
It's just a small part of the fantastic view over the Fjord on the south side of Molde with it's extreme amounts of high mountain peaks - one of the most beautiful parts of Norway  :Love:

I was blown away just on the ferry from Vestnes to Molde and especially the view from above the city - I seem to remember a TV tower up there ...?... I was there in 2001.

Yes please - more pictures of your engine and a video of it running Bard  ;)

Ove - how are the new shop comming allong ?

På forhånd mange tak.

Per

Offline crankshafter

  • Full Member
  • ****
  • Posts: 127
  • Molde, Norway
Re: Finaly get started
« Reply #19 on: June 28, 2017, 12:24:06 PM »
Hi Admiral
You are velcome back😆.
And the rest of you,  to see the north west aerea of Norway 😃

Sent fra min SM-G870F via Tapatalk

"I cut it twice, and it's still to short"!!??">#%

Offline Camm-1

  • Full Member
  • ****
  • Posts: 286
  • Sweden
Re: Finaly get started
« Reply #20 on: July 04, 2017, 11:57:15 AM »
Nice little engine Bård😀
Is it an diesel or glow?
My building has came up a bit but now I have some days off.

Skickat från min SM-G900F via Tapatalk


Offline crankshafter

  • Full Member
  • ****
  • Posts: 127
  • Molde, Norway
Re: Finaly get started
« Reply #21 on: July 04, 2017, 12:06:26 PM »
Det er en diesel.
Målar hus. Men det regner som f... så det blir noen timer i boden hver kveld. Fikk oppskrift på fuel i går kveld så i kveld vil kjemikeren i meg prøve og lage en mix😈😨
Hør du en smell så er det inte oskan😂
Bård.


Sent fra min SM-G870F via Tapatalk

"I cut it twice, and it's still to short"!!??">#%

Offline Camm-1

  • Full Member
  • ****
  • Posts: 286
  • Sweden
Re: Finaly get started
« Reply #22 on: July 04, 2017, 02:26:33 PM »
Det er en diesel.
Målar hus. Men det regner som f... så det blir noen timer i boden hver kveld. Fikk oppskrift på fuel i går kveld så i kveld vil kjemikeren i meg prøve og lage en mix😈😨
Hør du en smell så er det inte oskan😂
Bård.


Sent fra min SM-G870F via Tapatalk
Hej
Skitväder här med idag.
Det är väl eter och nåt skit.
Glödstifts motorer är väl lite svårt att få tillräckligt komp i.

Skickat från min SM-G900F via Tapatalk


Offline Admiral_dk

  • Full Member
  • *****
  • Posts: 3752
  • Søften - Denmark
Re: Finaly get started
« Reply #23 on: July 04, 2017, 09:28:15 PM »
The new workshop is coming along nicely Ove :ThumbsUp: (jeg kan godt skrive Dansk, men af hensyn til resten her)  ;)

Bard a warning - I had only trouble trying to get my Webra 15 diesel to run in my youth so I could fly it  :Mad:  :cussing:

It turned out to  be fuel trouble and it only happened because we mixed it ourselves  ::)

The main reason is the simple fact that there is two different kinds of Ether - the one that they used in the old days in hospitals (that my Mom took with her home for me) and the stuff that can be used for fuel. As they smell the same you are none the wiser in that sense, but the hospital stuff is a lousy igniter and the other type is a good one.

I bought some pre-mix from an online shop here in Denmark and all my diesels now start easily  :whoohoo:

I've gave up on painting my house so far this year and hope for a dry spell before winter so I can paint window ledges and some other parts that need it badly ....
« Last Edit: July 04, 2017, 09:31:43 PM by Admiral_dk »

Offline Camm-1

  • Full Member
  • ****
  • Posts: 286
  • Sweden
Re: Finaly get started
« Reply #24 on: September 04, 2017, 07:06:37 AM »
Hi
Almost ready outside and can go inside to continue

Skickat från min SM-G900F via Tapatalk


simplyloco

  • Guest
Re: Finaly get started
« Reply #25 on: September 04, 2017, 07:24:29 AM »
Gosh, I could quite easily live in there!
John

Offline Zephyrin

  • Full Member
  • ****
  • Posts: 766
  • near Paris, France
Re: Finaly get started
« Reply #26 on: September 04, 2017, 09:40:36 AM »
All this space for your workshop, wow, I'm dreaming!
we do not see much slope in the roof, almost nothing, do this is not a source of problems to come?



Offline steam guy willy

  • Full Member
  • *****
  • Posts: 3238
Re: Finaly get started
« Reply #27 on: September 04, 2017, 02:38:29 PM »
It's just a small part of the fantastic view over the Fjord on the south side of Molde with it's extreme amounts of high mountain peaks - one of the most beautiful parts of Norway  :Love:

I was blown away just on the ferry from Vestnes to Molde and especially the view from above the city - I seem to remember a TV tower up there ...?... I was there in 2001.

Yes please - more pictures of your engine and a video of it running Bard  ;)

Ove - how are the new shop comming allong



I have been to Norway with the army in the 60's Barduvoss if i remember   beautifull country 'land of the midnight sun'  and after 3 breakfasts dinners and teas we started to get a bit tired and decided to go to bed !!! Coming down the Fiords by plane was lovely, all the different hues of blues etc etc !!


På forhånd mange tak.

Per

Offline Camm-1

  • Full Member
  • ****
  • Posts: 286
  • Sweden
Re: Finaly get started
« Reply #28 on: September 05, 2017, 04:14:50 PM »
All this space for your workshop, wow, I'm dreaming!
we do not see much slope in the roof, almost nothing, do this is not a source of problems to come?
The slope is 3.5 degres as the roof of the old house. But my new is maybe 15 times stronger with 195×45mm cc600 the old is 100×40 cc1200mm


Skickat från min SM-G900F via Tapatalk


Offline Roger B

  • Global Moderator
  • Full Member
  • *****
  • Posts: 6133
  • Switzerland
Re: Finaly get started
« Reply #29 on: September 05, 2017, 06:04:36 PM »
Looks good  :ThumbsUp:  :ThumbsUp: So much space  :)
Best regards

Roger

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal