Author Topic: Finaly get started  (Read 11869 times)

Offline Camm-1

  • Full Member
  • ****
  • Posts: 286
  • Sweden
Finaly get started
« on: May 25, 2017, 03:10:00 PM »
Day 1 on my new workshop .build together with the house and will be 54 m2😀

Skickat från min SM-G900F via Tapatalk


Offline Admiral_dk

  • Full Member
  • *****
  • Posts: 3752
  • Søften - Denmark
Re: Finaly get started
« Reply #1 on: May 25, 2017, 07:43:32 PM »
Always a nice project, to start on a new workshop  :) + the anticipation about what you are going to make there  :cheers:

Online fumopuc

  • Full Member
  • *****
  • Posts: 3231
  • Munich, Germany, EU
Re: Finaly get started
« Reply #2 on: May 25, 2017, 08:04:47 PM »
WOW, what a Project.

Kind Regards
Achim

Offline crankshafter

  • Full Member
  • ****
  • Posts: 127
  • Molde, Norway
Re: Finaly get started
« Reply #3 on: May 25, 2017, 10:37:41 PM »
Hallo Ove.
Godt å se at du endelig er i gang. Maskiner installert før høsten ? :whoohoo:. regner med at du venter på og ferdigstille radialen.
 Jeg har 2-3 forskjellige prosjekt på gang to 1 cyl."Stort sett Eget design" :naughty: og en V-twin også denne eget design . Men så snart regnet gir seg så blir det og male huset :stickpoke: Kanskje jeg skulle sende deg noen bilder......?
Bård
"I cut it twice, and it's still to short"!!??">#%

Offline Camm-1

  • Full Member
  • ****
  • Posts: 286
  • Sweden
Re: Finaly get started
« Reply #4 on: May 26, 2017, 06:05:20 PM »
Hej Bård
Ja till hösten ska det vare klart😀
Jaså har ni regn här är hett som i helvete idag.
Skicka gärna bilder; det är roligt att se😀
Ha de gott

Skickat från min SM-G900F via Tapatalk


Offline Tennessee Whiskey

  • Full Member
  • *****
  • Posts: 3781
  • Springfield, Tennessee. USA
Re: Finaly get started
« Reply #5 on: May 26, 2017, 08:41:07 PM »
What did they say Harry, what did they say  :lolb: :lolb:

Cletus

Offline Flyboy Jim

  • Full Member
  • ****
  • Posts: 2002
  • Independence, Oregon
Re: Finaly get started
« Reply #6 on: May 27, 2017, 03:32:27 AM »
This is going to be a fun build. Keep the pictures coming. Even if Cletus and I don't have the slightest idea what you're saying.   :noidea:

Jim
Sherline 4400 Lathe
Sherline 5400 Mill
"You can do small things on big machines, but you can do small things on small machines".

Offline Camm-1

  • Full Member
  • ****
  • Posts: 286
  • Sweden
Re: Finaly get started
« Reply #7 on: May 27, 2017, 06:51:05 AM »
It goes fast with  modern material. Here is day 2 and today we put in the floorheating and start with the armering net😀

Skickat från min SM-G900F via Tapatalk

« Last Edit: May 27, 2017, 07:24:33 AM by Camm-1 »

Offline crankshafter

  • Full Member
  • ****
  • Posts: 127
  • Molde, Norway
Re: Finaly get started
« Reply #8 on: May 27, 2017, 02:52:36 PM »
Hei Ove.
Nice work and good weather. So finaly you got thrue the fighting with the building- tech.
And I can see a green Deer in one of the pictures. "unlimeted access to equipment"? :lolb: :whoohoo:
I see some of the guys struggle with Swedish/Norwegian languages :naughty: :ROFL:.
I dag skiner solen her ochså. pushing lawnmover Pils i premie :DrinkPint: :ROFL:
try google translator :headscratch:

Best Regards
CS 

"I cut it twice, and it's still to short"!!??">#%

Offline Camm-1

  • Full Member
  • ****
  • Posts: 286
  • Sweden
Re: Finaly get started
« Reply #9 on: May 27, 2017, 05:18:28 PM »
Ha ha😎 here is about 30 c bloody hot today.
Yes maschines are prety easy to get😉
We quit for today its to hot
Tomorrow the ironnet and monday concrete.

Skickat från min SM-G900F via Tapatalk


Offline Camm-1

  • Full Member
  • ****
  • Posts: 286
  • Sweden
Re: Finaly get started
« Reply #10 on: May 27, 2017, 05:19:38 PM »
Ha ha😎 here is about 30 c bloody hot today.
Yes maschines are prety easy to get😉
We quit for today its to hot
Tomorrow the ironnet and monday concrete.

Skickat från min SM-G900F via Tapatalk


Skickat från min SM-G900F via Tapatalk


Offline crankshafter

  • Full Member
  • ****
  • Posts: 127
  • Molde, Norway
Re: Finaly get started
« Reply #11 on: May 27, 2017, 08:26:52 PM »
Ha ha😎 here is about 30 c bloody hot today.
Yes maschines are prety easy to get😉
We quit for today its to hot
Tomorrow the ironnet and monday concrete.

Skickat från min SM-G900F via Tapatalk


Skickat från min SM-G900F via Tapatalk
Some bits and pices from the start of the Holly Buddy.
Cs

Sent fra min SM-G870F via Tapatalk

"I cut it twice, and it's still to short"!!??">#%

Offline Camm-1

  • Full Member
  • ****
  • Posts: 286
  • Sweden
Re: Finaly get started
« Reply #12 on: May 27, 2017, 08:37:26 PM »
Buddy Holly sounds good😀

Skickat från min SM-G900F via Tapatalk


Offline Camm-1

  • Full Member
  • ****
  • Posts: 286
  • Sweden
Re: Finaly get started
« Reply #13 on: May 31, 2017, 05:19:21 AM »
Here is the last pics from the weekend. We put the concrete in on monday. I ordered fullfloating but the came with thick butdriver mix in some shit and then its floating puuhh.


Skickat från min SM-G900F via Tapatalk
« Last Edit: May 31, 2017, 11:15:15 AM by Camm-1 »

Offline crankshafter

  • Full Member
  • ****
  • Posts: 127
  • Molde, Norway
Re: Finaly get started
« Reply #14 on: June 27, 2017, 09:13:49 PM »
Hei på deg Ove.
Hvordan går det med garasje/verkted byggingen?
Sender deg et pr bider av flymotoren. Den er nå "ferdig " venter på propell som er på veg in a slow boat from china.
Helsing Bård.

Sent fra min SM-G870F via Tapatalk

"I cut it twice, and it's still to short"!!??">#%

Offline Tennessee Whiskey

  • Full Member
  • *****
  • Posts: 3781
  • Springfield, Tennessee. USA
Re: Finaly get started
« Reply #15 on: June 27, 2017, 09:42:59 PM »
I didn't understand a word of that, but, the parts look great  :cheers:

Cletus

Edit: I did get the slow boat to China part  :lolb:

Offline 10KPete

  • Full Member
  • ****
  • Posts: 1606
  • Nordland, WA, USA
Re: Finaly get started
« Reply #16 on: June 27, 2017, 11:45:13 PM »
If a picture is worth a thousand words, then those words never stood a chance....

 ^-^

Beautiful parts. Make it run!

 :cheers:

Pete
Craftsman, Tinkerer, Curious Person.
Retired, finally!
SB 10K lathe, Benchmaster mill. And stuff.

Offline crankshafter

  • Full Member
  • ****
  • Posts: 127
  • Molde, Norway
Re: Finaly get started
« Reply #17 on: June 28, 2017, 10:24:32 AM »
I didn't understand a word of that, but, the parts look great  :cheers:

Cletus

Edit: I did get the slow boat to China part  b:
Cletus.
Just talking about tthe wether😉
Best Regards CS

Sent fra min SM-G870F via Tapatalk

"I cut it twice, and it's still to short"!!??">#%

Offline Admiral_dk

  • Full Member
  • *****
  • Posts: 3752
  • Søften - Denmark
Re: Finaly get started
« Reply #18 on: June 28, 2017, 12:12:40 PM »
It's just a small part of the fantastic view over the Fjord on the south side of Molde with it's extreme amounts of high mountain peaks - one of the most beautiful parts of Norway  :Love:

I was blown away just on the ferry from Vestnes to Molde and especially the view from above the city - I seem to remember a TV tower up there ...?... I was there in 2001.

Yes please - more pictures of your engine and a video of it running Bard  ;)

Ove - how are the new shop comming allong ?

På forhånd mange tak.

Per

Offline crankshafter

  • Full Member
  • ****
  • Posts: 127
  • Molde, Norway
Re: Finaly get started
« Reply #19 on: June 28, 2017, 12:24:06 PM »
Hi Admiral
You are velcome back😆.
And the rest of you,  to see the north west aerea of Norway 😃

Sent fra min SM-G870F via Tapatalk

"I cut it twice, and it's still to short"!!??">#%

Offline Camm-1

  • Full Member
  • ****
  • Posts: 286
  • Sweden
Re: Finaly get started
« Reply #20 on: July 04, 2017, 11:57:15 AM »
Nice little engine Bård😀
Is it an diesel or glow?
My building has came up a bit but now I have some days off.

Skickat från min SM-G900F via Tapatalk


Offline crankshafter

  • Full Member
  • ****
  • Posts: 127
  • Molde, Norway
Re: Finaly get started
« Reply #21 on: July 04, 2017, 12:06:26 PM »
Det er en diesel.
Målar hus. Men det regner som f... så det blir noen timer i boden hver kveld. Fikk oppskrift på fuel i går kveld så i kveld vil kjemikeren i meg prøve og lage en mix😈😨
Hør du en smell så er det inte oskan😂
Bård.


Sent fra min SM-G870F via Tapatalk

"I cut it twice, and it's still to short"!!??">#%

Offline Camm-1

  • Full Member
  • ****
  • Posts: 286
  • Sweden
Re: Finaly get started
« Reply #22 on: July 04, 2017, 02:26:33 PM »
Det er en diesel.
Målar hus. Men det regner som f... så det blir noen timer i boden hver kveld. Fikk oppskrift på fuel i går kveld så i kveld vil kjemikeren i meg prøve og lage en mix😈😨
Hør du en smell så er det inte oskan😂
Bård.


Sent fra min SM-G870F via Tapatalk
Hej
Skitväder här med idag.
Det är väl eter och nåt skit.
Glödstifts motorer är väl lite svårt att få tillräckligt komp i.

Skickat från min SM-G900F via Tapatalk


Offline Admiral_dk

  • Full Member
  • *****
  • Posts: 3752
  • Søften - Denmark
Re: Finaly get started
« Reply #23 on: July 04, 2017, 09:28:15 PM »
The new workshop is coming along nicely Ove :ThumbsUp: (jeg kan godt skrive Dansk, men af hensyn til resten her)  ;)

Bard a warning - I had only trouble trying to get my Webra 15 diesel to run in my youth so I could fly it  :Mad:  :cussing:

It turned out to  be fuel trouble and it only happened because we mixed it ourselves  ::)

The main reason is the simple fact that there is two different kinds of Ether - the one that they used in the old days in hospitals (that my Mom took with her home for me) and the stuff that can be used for fuel. As they smell the same you are none the wiser in that sense, but the hospital stuff is a lousy igniter and the other type is a good one.

I bought some pre-mix from an online shop here in Denmark and all my diesels now start easily  :whoohoo:

I've gave up on painting my house so far this year and hope for a dry spell before winter so I can paint window ledges and some other parts that need it badly ....
« Last Edit: July 04, 2017, 09:31:43 PM by Admiral_dk »

Offline Camm-1

  • Full Member
  • ****
  • Posts: 286
  • Sweden
Re: Finaly get started
« Reply #24 on: September 04, 2017, 07:06:37 AM »
Hi
Almost ready outside and can go inside to continue

Skickat från min SM-G900F via Tapatalk


simplyloco

  • Guest
Re: Finaly get started
« Reply #25 on: September 04, 2017, 07:24:29 AM »
Gosh, I could quite easily live in there!
John

Offline Zephyrin

  • Full Member
  • ****
  • Posts: 766
  • near Paris, France
Re: Finaly get started
« Reply #26 on: September 04, 2017, 09:40:36 AM »
All this space for your workshop, wow, I'm dreaming!
we do not see much slope in the roof, almost nothing, do this is not a source of problems to come?



Offline steam guy willy

  • Full Member
  • *****
  • Posts: 3238
Re: Finaly get started
« Reply #27 on: September 04, 2017, 02:38:29 PM »
It's just a small part of the fantastic view over the Fjord on the south side of Molde with it's extreme amounts of high mountain peaks - one of the most beautiful parts of Norway  :Love:

I was blown away just on the ferry from Vestnes to Molde and especially the view from above the city - I seem to remember a TV tower up there ...?... I was there in 2001.

Yes please - more pictures of your engine and a video of it running Bard  ;)

Ove - how are the new shop comming allong



I have been to Norway with the army in the 60's Barduvoss if i remember   beautifull country 'land of the midnight sun'  and after 3 breakfasts dinners and teas we started to get a bit tired and decided to go to bed !!! Coming down the Fiords by plane was lovely, all the different hues of blues etc etc !!


På forhånd mange tak.

Per

Offline Camm-1

  • Full Member
  • ****
  • Posts: 286
  • Sweden
Re: Finaly get started
« Reply #28 on: September 05, 2017, 04:14:50 PM »
All this space for your workshop, wow, I'm dreaming!
we do not see much slope in the roof, almost nothing, do this is not a source of problems to come?
The slope is 3.5 degres as the roof of the old house. But my new is maybe 15 times stronger with 195×45mm cc600 the old is 100×40 cc1200mm


Skickat från min SM-G900F via Tapatalk


Offline Roger B

  • Global Moderator
  • Full Member
  • *****
  • Posts: 6133
  • Switzerland
Re: Finaly get started
« Reply #29 on: September 05, 2017, 06:04:36 PM »
Looks good  :ThumbsUp:  :ThumbsUp: So much space  :)
Best regards

Roger

Offline Camm-1

  • Full Member
  • ****
  • Posts: 286
  • Sweden
Re: Finaly get started
« Reply #30 on: December 22, 2017, 03:29:45 PM »
Merry cristmas all!
Here is a few pics of how long I have come with my new shop.
Home built floorheating system works super and cheap.
Only the sealing left nearly. It have to be lowered to take 30 cm isolation.
Then it will be tje same panels on it like on the walls.
Ove

Skickat från min SM-G900F via Tapatalk


Offline Kim

  • Global Moderator
  • Full Member
  • *****
  • Posts: 7860
  • Portland, Oregon, USA
Re: Finaly get started
« Reply #31 on: December 22, 2017, 05:51:20 PM »
That's shaping up very nicely!  I envy the floor heat you have in your shop! That must be NICE!
Kim

Offline scc

  • Full Member
  • ****
  • Posts: 1104
  • Lancashire, UK
Re: Finaly get started
« Reply #32 on: December 23, 2017, 07:47:55 PM »
Looking good :)   Terry

Offline b.lindsey

  • Global Moderator
  • Full Member
  • *****
  • Posts: 13860
  • Dallas, NC, USA
    • Workbench-Miniatures
Re: Finaly get started
« Reply #33 on: December 23, 2017, 08:00:23 PM »
I can only dream of having that much space!!  Looks like you will be moving into it pretty soon :)

Bill

Offline Camm-1

  • Full Member
  • ****
  • Posts: 286
  • Sweden
Re: Finaly get started
« Reply #34 on: October 20, 2018, 12:45:21 PM »
Hi
Now  I Have moved in to  my new shop and started å bit with my 9 cyl.

Skickat från min SM-G960F via Tapatalk


Offline Camm-1

  • Full Member
  • ****
  • Posts: 286
  • Sweden
Re: Finaly get started
« Reply #35 on: October 20, 2018, 12:47:38 PM »
There should have been a movie to :Doh:

Offline Admiral_dk

  • Full Member
  • *****
  • Posts: 3752
  • Søften - Denmark
Re: Finaly get started
« Reply #36 on: October 21, 2018, 08:38:24 PM »
Looking very good  :ThumbsUp:

Offline b.lindsey

  • Global Moderator
  • Full Member
  • *****
  • Posts: 13860
  • Dallas, NC, USA
    • Workbench-Miniatures
Re: Finaly get started
« Reply #37 on: October 22, 2018, 12:36:33 AM »
That is more than a bit of work!! Looks great and hope the new shop is working well.

Bill

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal