Author Topic: Finaly get started  (Read 11875 times)

Offline Camm-1

  • Full Member
  • ****
  • Posts: 286
  • Sweden
Finaly get started
« on: May 25, 2017, 03:10:00 PM »
Day 1 on my new workshop .build together with the house and will be 54 m2😀

Skickat från min SM-G900F via Tapatalk


Offline Admiral_dk

  • Full Member
  • *****
  • Posts: 3752
  • Søften - Denmark
Re: Finaly get started
« Reply #1 on: May 25, 2017, 07:43:32 PM »
Always a nice project, to start on a new workshop  :) + the anticipation about what you are going to make there  :cheers:

Offline fumopuc

  • Full Member
  • *****
  • Posts: 3231
  • Munich, Germany, EU
Re: Finaly get started
« Reply #2 on: May 25, 2017, 08:04:47 PM »
WOW, what a Project.

Kind Regards
Achim

Offline crankshafter

  • Full Member
  • ****
  • Posts: 127
  • Molde, Norway
Re: Finaly get started
« Reply #3 on: May 25, 2017, 10:37:41 PM »
Hallo Ove.
Godt å se at du endelig er i gang. Maskiner installert før høsten ? :whoohoo:. regner med at du venter på og ferdigstille radialen.
 Jeg har 2-3 forskjellige prosjekt på gang to 1 cyl."Stort sett Eget design" :naughty: og en V-twin også denne eget design . Men så snart regnet gir seg så blir det og male huset :stickpoke: Kanskje jeg skulle sende deg noen bilder......?
Bård
"I cut it twice, and it's still to short"!!??">#%

Offline Camm-1

  • Full Member
  • ****
  • Posts: 286
  • Sweden
Re: Finaly get started
« Reply #4 on: May 26, 2017, 06:05:20 PM »
Hej Bård
Ja till hösten ska det vare klart😀
Jaså har ni regn här är hett som i helvete idag.
Skicka gärna bilder; det är roligt att se😀
Ha de gott

Skickat från min SM-G900F via Tapatalk


Offline Tennessee Whiskey

  • Full Member
  • *****
  • Posts: 3781
  • Springfield, Tennessee. USA
Re: Finaly get started
« Reply #5 on: May 26, 2017, 08:41:07 PM »
What did they say Harry, what did they say  :lolb: :lolb:

Cletus

Offline Flyboy Jim

  • Full Member
  • ****
  • Posts: 2002
  • Independence, Oregon
Re: Finaly get started
« Reply #6 on: May 27, 2017, 03:32:27 AM »
This is going to be a fun build. Keep the pictures coming. Even if Cletus and I don't have the slightest idea what you're saying.   :noidea:

Jim
Sherline 4400 Lathe
Sherline 5400 Mill
"You can do small things on big machines, but you can do small things on small machines".

Offline Camm-1

  • Full Member
  • ****
  • Posts: 286
  • Sweden
Re: Finaly get started
« Reply #7 on: May 27, 2017, 06:51:05 AM »
It goes fast with  modern material. Here is day 2 and today we put in the floorheating and start with the armering net😀

Skickat från min SM-G900F via Tapatalk

« Last Edit: May 27, 2017, 07:24:33 AM by Camm-1 »

Offline crankshafter

  • Full Member
  • ****
  • Posts: 127
  • Molde, Norway
Re: Finaly get started
« Reply #8 on: May 27, 2017, 02:52:36 PM »
Hei Ove.
Nice work and good weather. So finaly you got thrue the fighting with the building- tech.
And I can see a green Deer in one of the pictures. "unlimeted access to equipment"? :lolb: :whoohoo:
I see some of the guys struggle with Swedish/Norwegian languages :naughty: :ROFL:.
I dag skiner solen her ochså. pushing lawnmover Pils i premie :DrinkPint: :ROFL:
try google translator :headscratch:

Best Regards
CS 

"I cut it twice, and it's still to short"!!??">#%

Offline Camm-1

  • Full Member
  • ****
  • Posts: 286
  • Sweden
Re: Finaly get started
« Reply #9 on: May 27, 2017, 05:18:28 PM »
Ha ha😎 here is about 30 c bloody hot today.
Yes maschines are prety easy to get😉
We quit for today its to hot
Tomorrow the ironnet and monday concrete.

Skickat från min SM-G900F via Tapatalk


Offline Camm-1

  • Full Member
  • ****
  • Posts: 286
  • Sweden
Re: Finaly get started
« Reply #10 on: May 27, 2017, 05:19:38 PM »
Ha ha😎 here is about 30 c bloody hot today.
Yes maschines are prety easy to get😉
We quit for today its to hot
Tomorrow the ironnet and monday concrete.

Skickat från min SM-G900F via Tapatalk


Skickat från min SM-G900F via Tapatalk


Offline crankshafter

  • Full Member
  • ****
  • Posts: 127
  • Molde, Norway
Re: Finaly get started
« Reply #11 on: May 27, 2017, 08:26:52 PM »
Ha ha😎 here is about 30 c bloody hot today.
Yes maschines are prety easy to get😉
We quit for today its to hot
Tomorrow the ironnet and monday concrete.

Skickat från min SM-G900F via Tapatalk


Skickat från min SM-G900F via Tapatalk
Some bits and pices from the start of the Holly Buddy.
Cs

Sent fra min SM-G870F via Tapatalk

"I cut it twice, and it's still to short"!!??">#%

Offline Camm-1

  • Full Member
  • ****
  • Posts: 286
  • Sweden
Re: Finaly get started
« Reply #12 on: May 27, 2017, 08:37:26 PM »
Buddy Holly sounds good😀

Skickat från min SM-G900F via Tapatalk


Offline Camm-1

  • Full Member
  • ****
  • Posts: 286
  • Sweden
Re: Finaly get started
« Reply #13 on: May 31, 2017, 05:19:21 AM »
Here is the last pics from the weekend. We put the concrete in on monday. I ordered fullfloating but the came with thick butdriver mix in some shit and then its floating puuhh.


Skickat från min SM-G900F via Tapatalk
« Last Edit: May 31, 2017, 11:15:15 AM by Camm-1 »

Offline crankshafter

  • Full Member
  • ****
  • Posts: 127
  • Molde, Norway
Re: Finaly get started
« Reply #14 on: June 27, 2017, 09:13:49 PM »
Hei på deg Ove.
Hvordan går det med garasje/verkted byggingen?
Sender deg et pr bider av flymotoren. Den er nå "ferdig " venter på propell som er på veg in a slow boat from china.
Helsing Bård.

Sent fra min SM-G870F via Tapatalk

"I cut it twice, and it's still to short"!!??">#%

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal