Author Topic: Screw Supplier Wanted Please  (Read 1820 times)

Offline pgp001

  • Full Member
  • ****
  • Posts: 812
  • West Yorkshire - UK
Screw Supplier Wanted Please
« on: May 14, 2017, 11:27:07 AM »
During the course of the last year I bought a packet of M1.2 Round Head Brass Screws approx 10 or 12mm long (they only need to be about 3mm long) to hold the cladding panels on my model mill engine. I have one screw left in stock so thought I would buy some more.

The problem is I have hunted every supplier I can think of to obtain these and nobody seems to do them. If I had not already had some I would assume they were not made, but I know they are.

Before I go completely mad can anyone on hear give me a clue where I might have bought them from. None of the suppliers at Doncaster show had any ideas either.

Thanks

Phil

Offline bizibilder

  • Jr. member
  • **
  • Posts: 3
Re: Screw Supplier Wanted Please
« Reply #1 on: May 14, 2017, 12:09:03 PM »

Offline fumopuc

  • Full Member
  • *****
  • Posts: 3231
  • Munich, Germany, EU
Re: Screw Supplier Wanted Please
« Reply #2 on: May 14, 2017, 12:41:31 PM »
Kind Regards
Achim

Offline Gas_mantle

  • Full Member
  • ****
  • Posts: 1365
  • North Yorks - UK.
    • My Youtube channel
Re: Screw Supplier Wanted Please
« Reply #3 on: May 14, 2017, 12:53:18 PM »
Phil,

I came across this forum thread which may be of interest :-

http://www.modelenginemaker.com/index.php?topic=628.0

I haven't checked all the links but may be worth a look.

Peter

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal