Welcome to ModelEngineMaker !If you have problems registering or logging in, please use the contact menu option to request assistance.
I have tried several vices for my Mill which has a table 400x120 mm and I don't want it to be to large and heavy, also it's awkward if the vice overhangs the front of the table and blocks view of hand wheel. My latest purchase from Arceurotrade measures 160x60mm is very accurate and doesn't get any longer than the body when extended. Compared to the traditional vice it opens 20mm wider as well. At first I found the adjustment in 5 small steps of approx. 19mm a bit fiddly as your not sure where in the range you are but by marking the range with some tape it is now obvious if you should go to the next step or not. What's your favourite vice?Geoff