Author Topic: Mini / Micro Tapping Tools  (Read 531 times)

Offline Astro-Eric

  • Jr. member
  • **
  • Posts: 4
Mini / Micro Tapping Tools
« on: March 31, 2017, 03:37:44 PM »
Reviewing my own tools might be a bit skewed, but see what you think.  I've been doing a ton of tapping for both work and personal projects.  Most of what I tap is #4 and smaller.  So I developed a set of tools that help me when hand tapping of the tiny taps is necessary.  I was hoping to make a little extra money for some new projects that are on the horizon and made a few sets to sell.  I had a ton of fun making them and put a lot of care into each piece.

 I've tapped hundreds of #0-80 threaded holes with my micro tap knob and probably thousands with my mini tap handle.  There are also some other tools in the kit that aid with micro layouts.  I also have some tap knobs and tap handles that are available separately from the kit.  You can see all the tools at my Website

But here's a quick snapshot.  Thanks for taking a look.


« Last Edit: March 31, 2017, 03:48:38 PM by Astro-Eric »