Welcome to ModelEngineMaker !If you have problems registering or logging in, please use the contact menu option to request assistance.
That is minion v2.1 aka the older of the two grand sons.
Print the Widest Range of Materials Possible.Building on our signature high temperature performance that allows you to print high temperature materials we've now focussed on adding increased functionality with soft and flexible filaments. By providing a PTFE liner tube through the hotend that you can extend into your extruder this gives the ability to add the confinement and constraint needed to make excellent quality prints with flexible filaments like NinjaFlex, FlexPLA and FlexPolyester. This opens up a huge range of new opportunities for your printer.- See more at: http://e3d-online.com/v6-1.75mm-Universal#sthash.sL3UPYbE.dpufHigh Temperature Peformance.With no PEEK or PTFE in hot regions of our HotEnd we can reach 300C with the supplied thermistor. By swapping a thermistor for a thermocouple (may require additional electronics) you can reach over 400C. This not only allows you to print extremely high temperature materials like Polycarbonate and Nylons but also eliminates HotEnd meltdown failures associated with PEEK/PTFE designs. Although our latest v6 hotend has a PTFE liner inside the hotend this liner is never subjected to high temperatures so there is no risk of damaging the liner through overheating.- See more at: http://e3d-online.com/v6-1.75mm-Universal#sthash.sL3UPYbE.dpuf