Author Topic: Four Facet Drill Sharpening and Grinding Wheel Dressing  (Read 1064 times)

Offline metaler

  • Full Member
  • ****
  • Posts: 17
Four Facet Drill Sharpening and Grinding Wheel Dressing
« on: March 13, 2017, 07:26:34 PM »
First a big thank you to all that have viewed my videos showing my grinding rests being used. This I can see by the large numbers on my website and  YouTube stats.

I have now come to the final two,  “Four Facet Drill Sharpening” and “Wheel Dressing”.  Links here.  http://www.homews.co.uk/page224.html  .

My next videos will be in a series which I call “Made in an Afternoon” and consists of  small projects on my website . Typical example here. http://www.homews.co.uk/page73.html

However, this time of year is a very busy period in the garden for me,  added to which, the local Salvation Army, of which I am a member, have asked me,  due to my cabinet making interests, to make some simple items for their building refurbishment program.

Because of this, I will not be issuing any more videos for a few months.

Harold

Online Jo

  • Administrator
  • Full Member
  • *****
  • Posts: 12795
  • Hampshire, england.
Re: Four Facet Drill Sharpening and Grinding Wheel Dressing
« Reply #1 on: March 14, 2017, 07:58:50 AM »
Thanks Harold, lots of people are benefiting from your efforts.

There are a few of us into gardening on the forum http://www.modelenginemaker.com/index.php/topic,6973.0.html 8)

Jo
Enjoyment is more important than achievement.

Offline bruedney

  • Full Member
  • ****
  • Posts: 400
  • Wellington, New Zealand
Re: Four Facet Drill Sharpening and Grinding Wheel Dressing
« Reply #2 on: March 14, 2017, 08:19:26 AM »
And at least one that is also a Sally

Thanks for all that you have given to the Model Engineering community

Tool makers clamps are next on my list

Cheers

Bruce Edney (Major - New Zealand)
‘Results! Why man, I have gotten a lot of results. I know several thousand things that won’t work.’ — Thomas Alva Edison