Author Topic: Another Tiny IC Engine  (Read 5097 times)

Offline Flyboy Jim

  • Full Member
  • ****
  • Posts: 1081
  • Independence, Oregon
Re: Another Tiny IC Engine
« Reply #195 on: March 20, 2017, 07:47:41 PM »
Have you got any new projects started lately?
Bill
Actually no Bill and really no excuse for not having started one this year. I do have all the material for the Waller Table top engine and need to get myself motivated and get after it. Spring is here and yard things are taking over but I really need to get back to my shop.

Don

Don...........I just googled "Waller Table Top Engine". What a nice looking engine! Looking forward to your build thread....hint.....hint!  :naughty:

Jim
Sherline 4400 Lathe
Sherline 5400 Mill

Online Tennessee Whiskey

  • Full Member
  • *****
  • Posts: 2914
  • Springfield, Tennessee. USA
Re: Another Tiny IC Engine
« Reply #196 on: March 20, 2017, 07:51:38 PM »
Just catching up. Bill, looking sweet. Is the parts bucket a five gallon one or a thumb thimble  :shrug:, man that's tiny.

Eric

Online crueby

  • Full Member
  • *****
  • Posts: 3156
  • Rochester NY
Re: Another Tiny IC Engine
« Reply #197 on: March 20, 2017, 07:54:02 PM »
Have you got any new projects started lately?
Bill
Actually no Bill and really no excuse for not having started one this year. I do have all the material for the Waller Table top engine and need to get myself motivated and get after it. Spring is here and yard things are taking over but I really need to get back to my shop.

Don

Don...........I just googled "Waller Table Top Engine". What a nice looking engine! Looking forward to your build thread....hint.....hint!  :naughty:

Jim
Just did the same - got my vote for your build! If I could vote for it. Which I can't...   :ShakeHead:

Offline Don1966

  • Full Member
  • *****
  • Posts: 5491
  • Morgan City, LA (Along the Gulf Coast)
Re: Another Tiny IC Engine
« Reply #198 on: March 23, 2017, 03:40:59 PM »
Thanks for the vote guys and yes I do need to get off my butt and get to it.


Don

Offline Flyboy Jim

  • Full Member
  • ****
  • Posts: 1081
  • Independence, Oregon
Re: Another Tiny IC Engine
« Reply #199 on: March 23, 2017, 03:44:18 PM »
Thanks for the vote guys and yes I do need to get off my butt and get to it.


Don

Don...........you could always start a build thread with some info on the Waller and pictures of the your material?  :naughty: Just sayin!  ;)

Jim
Sherline 4400 Lathe
Sherline 5400 Mill

Online Tennessee Whiskey

  • Full Member
  • *****
  • Posts: 2914
  • Springfield, Tennessee. USA
Re: Another Tiny IC Engine
« Reply #200 on: March 23, 2017, 08:29:50 PM »
Bill, if I may, Don, Dog get yo butt off the dance floor and back in the shop more. We need to see some shiny brass. You can split up the gym and dance floor time with a little shop time for us bud, just saying: you can have your thread back now Bill.

Eric

Online b.lindsey

  • Global Moderator
  • Full Member
  • *****
  • Posts: 8996
  • Dallas, NC, USA
    • Workbench-Miniatures
Re: Another Tiny IC Engine
« Reply #201 on: March 23, 2017, 09:34:24 PM »
Yeah, you can do the Happy Dance for us when you finish that project awaiting your skills Don :)

Bill

Online Tennessee Whiskey

  • Full Member
  • *****
  • Posts: 2914
  • Springfield, Tennessee. USA
Re: Another Tiny IC Engine
« Reply #202 on: March 23, 2017, 10:24:02 PM »
He says he's a hot dog on the dance floor, now we need to see him on the shop floor  :stir:

Offline zeeprogrammer

  • Full Member
  • *****
  • Posts: 4633
  • West Chester, PA, USA
Re: Another Tiny IC Engine
« Reply #203 on: March 23, 2017, 11:58:06 PM »
He says he's a hot dog on the dance floor, now we need to see him on the shop floor  :stir:

 :ThumbsUp: Yeah. C'mon Don!
Carl (aka Zee) Will sometimes respond to 'hey' but never 'hey you', whistles, and certain dinner bells.
"Found a peanut."
To work. To work. Zee-The Thread Trasher.

Offline Don1966

  • Full Member
  • *****
  • Posts: 5491
  • Morgan City, LA (Along the Gulf Coast)
Re: Another Tiny IC Engine
« Reply #204 on: March 24, 2017, 03:28:18 PM »
Ahhh geeez guys now your putting a guilt trip me here. But glad to know I am still thought about. I will be back soon promise!

Don

Online b.lindsey

  • Global Moderator
  • Full Member
  • *****
  • Posts: 8996
  • Dallas, NC, USA
    • Workbench-Miniatures
Re: Another Tiny IC Engine
« Reply #205 on: March 28, 2017, 01:44:54 AM »
No progress to report yet, but still very much an active project. My wife has been in the hospital this past week and between that and minding the dogs and trying to get some day job things done, there just hasn't been any shop time left. Fortunately she was released today and is doing well so things should return to relative normality soon and I will post some progress as it happens.

Bill

Offline 90LX_Notch

  • Full Member
  • ****
  • Posts: 823
  • North Eastern Pennsylvania USA
    • YouTube Channel
Re: Another Tiny IC Engine
« Reply #206 on: March 28, 2017, 01:52:37 AM »
Glad to hear that your wife is doing well now Bill.  The engine can wait. 

-Bob
Proud Member of MEM

My Engine Videos on YouTube-
http://www.youtube.com/user/Notch90usa/videos

Online b.lindsey

  • Global Moderator
  • Full Member
  • *****
  • Posts: 8996
  • Dallas, NC, USA
    • Workbench-Miniatures
Re: Another Tiny IC Engine
« Reply #207 on: March 28, 2017, 02:00:36 AM »
Thanks Bob, I am anxious to get back on it. You and Dave are keeping me motivated, just need the time. Between my little green "bucket" and my scarcity, the gremlins are feeling positively abandoned :)

Bill

Offline steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 8418
  • Central Massachusetts, USA
Re: Another Tiny IC Engine
« Reply #208 on: March 28, 2017, 02:43:02 AM »
Best of wishes for a speedy recovery Bill.

Dave
"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Offline Flyboy Jim

  • Full Member
  • ****
  • Posts: 1081
  • Independence, Oregon
Re: Another Tiny IC Engine
« Reply #209 on: March 28, 2017, 03:07:25 AM »
No progress to report yet, but still very much an active project. My wife has been in the hospital this past week and between that and minding the dogs and trying to get some day job things done, there just hasn't been any shop time left. Fortunately she was released today and is doing well so things should return to relative normality soon and I will post some progress as it happens.

Bill

Glad to hear your wife is doing better Bill. That's scary stuff!

Jim
Sherline 4400 Lathe
Sherline 5400 Mill