Author Topic: My Easton and Anderson Grasshopper finished  (Read 371 times)

Offline geoff5269

  • Full Member
  • ****
  • Posts: 89
My Easton and Anderson Grasshopper finished
« on: January 10, 2017, 02:59:53 PM »
It's finally finished, it seemed to go on forever. There were a few challenges in this build which made me put it aside for a while but once you have started there is to much work invested to cast it aside. Now I'm very pleased I carried on. It's only when you are finished that you realise which dimensions are critical and how the alignment of all the axis is necessary.
I was wondering what was the advantage of the grasshopper design, I guess it keeps the flywheel within the footprint of the engine and also with the piston at the end of the beam there is more leverage, With a crank stroke of 1" but a piston stroke of 1 1/2" I made the bore smaller than plan at 5/8" which made the engine 7.4cc.
There are lots of hard to get at screws and assembly is best done in a certain order, I have used screws where there should be studs but I like the look of these more and realised it was never going to be a replica anyway so I just coloured it to my taste.
Hope to do video soon.
Geoff

Offline Dave Otto

  • Full Member
  • *****
  • Posts: 2729
  • Boise, Idaho USA
    • Photo Bucket
Re: My Easton and Anderson Grasshopper finished
« Reply #1 on: January 10, 2017, 05:28:51 PM »
Beautiful engine Geoff!
Very nice work.

Dave

Offline steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 8490
  • Central Massachusetts, USA
Re: My Easton and Anderson Grasshopper finished
« Reply #2 on: January 10, 2017, 05:35:54 PM »
Looks great!
"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Online Gas_mantle

  • Full Member
  • ****
  • Posts: 394
Re: My Easton and Anderson Grasshopper finished
« Reply #3 on: January 10, 2017, 05:48:25 PM »
A great build Geoff - gotta be proud of that one  :)

Offline Jo

  • Administrator
  • Full Member
  • *****
  • Posts: 9769
  • Hampshire, england.
Re: My Easton and Anderson Grasshopper finished
« Reply #4 on: January 10, 2017, 05:52:09 PM »
Nice  8)

The advantage of the grasshopper engine was its compact layout. However you will rarely find large grasshoppers as there is a disadvantage with the  comparatively large mass of the column in motion.

Jo
Usus est optimum magister

Offline scc

  • Full Member
  • ****
  • Posts: 273
Re: My Easton and Anderson Grasshopper finished
« Reply #5 on: January 10, 2017, 03:58:02 PM »
A lovely engine Geoff. I would be very proud of that one. :ThumbsUp:

Regards             Terry

Offline gerritv

  • Full Member
  • ****
  • Posts: 351
  • St Catharines, ON
    • Gerrit's Hobbies
Re: My Easton and Anderson Grasshopper finished
« Reply #6 on: January 10, 2017, 06:49:43 PM »
Beautiful finish work on the parts, looks very real.
Gerrit
Programming is like a Hit-n-Miss engine

Offline Don1966

  • Full Member
  • *****
  • Posts: 5552
  • Morgan City, LA (Along the Gulf Coast)
Re: My Easton and Anderson Grasshopper finished
« Reply #7 on: January 10, 2017, 05:23:37 PM »
Beautiful work Geoff are we going to see a video?..... :ThumbsUp:


Don