Author Topic: (re)building shop  (Read 5641 times)

Offline wdeputy

  • Full Member
  • ****
  • Posts: 53
(re)building shop
« on: November 07, 2016, 08:16:19 PM »
My 8 1/2 foot by 10 1/2 foot shop has evolved over the last few years.  It's been a collection of what's readily available or already on hand.  The time came to make new benches and generally clean things up.  The plan is to have a new mill by next summer so that was considered in the remake.  There is actually more storage space than before and you can't have too much.

Offline Nick_G

  • Full Member
  • ****
  • Posts: 266
Re: (re)building shop
« Reply #1 on: November 07, 2016, 11:38:36 PM »
.
Looking all sorted and organised.

I wish my workshop was so tidy.  ;D

Nick

Offline steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 12697
  • Central Massachusetts, USA
Re: (re)building shop
« Reply #2 on: November 08, 2016, 12:47:47 AM »
Nice shop!!!

Dave
"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Offline b.lindsey

  • Global Moderator
  • Full Member
  • *****
  • Posts: 13860
  • Dallas, NC, USA
    • Workbench-Miniatures
Re: (re)building shop
« Reply #3 on: November 08, 2016, 12:50:06 AM »
That looks fantastic deputy...well organized and neat as a pin. Now go make something and mess it up some  :naughty:

Bill

Offline Don1966

  • Full Member
  • *****
  • Posts: 6817
  • Columbia, MS
Re: (re)building shop
« Reply #4 on: November 08, 2016, 12:51:05 AM »
Very nice setup for the space you have...... :ThumbsUp:

Don

Offline gerritv

  • Full Member
  • ****
  • Posts: 734
  • St Catharines, ON
Re: (re)building shop
« Reply #5 on: November 08, 2016, 01:17:22 AM »
Very organized, and still wall space for more shelves for the inevitable expansion.

Don't confuse activity with progress

Offline Dave Otto

  • Full Member
  • *****
  • Posts: 4693
  • Boise, Idaho USA
    • Photo Bucket
Re: (re)building shop
« Reply #6 on: November 08, 2016, 01:17:40 AM »
Nice cozy (well organized) shop you have there!


Dave

Offline wdeputy

  • Full Member
  • ****
  • Posts: 53
Re: (re)building shop
« Reply #7 on: November 08, 2016, 03:49:02 AM »
Being inside the house it's always usable. Now, to have both time and energy at once...

Walt

Offline Zephyrin

  • Full Member
  • ****
  • Posts: 766
  • near Paris, France
Re: (re)building shop
« Reply #8 on: November 08, 2016, 08:34:10 AM »
I have most of these tools, but how come that my own shed looks so untidy, I'm dreaming to work in such a cosy place !

Offline Chipswitheverything

  • Full Member
  • ****
  • Posts: 556
Re: (re)building shop
« Reply #9 on: November 08, 2016, 09:16:06 AM »
Hi Walt, very attractive and well ordered workshop, what are you thinking of making in there now it is so nicely sorted out?  ( There must be a bit of swarf in there somewhere?? ! )   Dave

Online Kim

  • Global Moderator
  • Full Member
  • *****
  • Posts: 7860
  • Portland, Oregon, USA
Re: (re)building shop
« Reply #10 on: November 08, 2016, 04:13:59 PM »
Very nice!  Thanks for showing us around your shop!
Kim

Offline wdeputy

  • Full Member
  • ****
  • Posts: 53
Re: (re)building shop
« Reply #11 on: November 08, 2016, 05:40:50 PM »
Dave,
Now it's time to get back to the hit and miss that has been in the works for a while.  Being such a small space and in the house means that cleanup is a regular thing.  The shop vacuum is a must-have tool.  Besides, the shop cats will track everything around!

Walt

Offline Roger B

  • Global Moderator
  • Full Member
  • *****
  • Posts: 6133
  • Switzerland
Re: (re)building shop
« Reply #12 on: November 08, 2016, 08:57:56 PM »
Very nice  :ThumbsUp:  :ThumbsUp: What make is your little bench drill? It looks similar but not identical to my Proxxon one.
Best regards

Roger

Offline wdeputy

  • Full Member
  • ****
  • Posts: 53
Re: (re)building shop
« Reply #13 on: November 08, 2016, 09:46:22 PM »
Roger,
The drill press is from MicroMark and has been in use for a long time.  Drilled lotsa holes, it has.

Walt

Offline wdeputy

  • Full Member
  • ****
  • Posts: 53
Re: (re)building shop
« Reply #14 on: June 26, 2017, 01:26:21 AM »
This is part two of the shop re-make.  The first new machine turned out to be a lathe.  After a great deal of looking and reading, I settled on the Little Machine Shop 3540 lathe.  At 8 1/2 by 20, it just fit into the available space.
I picked up the lathe at the trucking depot and brought it home in the truck.  The cardboard box on top of the crate contains some accessories that were ordered at the same time.  LMS ships everything ordered with a new machine for the same charge as just the machine!

Arrival by D Carson, on Flickr

Once off the truck the crate was removed to see what was there.  The crate was too big to fit between the legs of the engine hoist so it was temporarily supported with a floor jack.

Uncrated by D Carson, on Flickr

Everything except the headstock was removed to make it easier to get into the house.  It was still a heavy bit of iron.  It was strapped onto a large two-wheeler foir the trip down the stairs.

Lighter Load by D Carson, on Flickr

A co-worker assisted in getting the lathe into the house.  He also lifted the heavy end to get it onto the chip tray sitting on the bench.

In The Shop by D Carson, on Flickr


Walt

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal