Author Topic: Moon Clock  (Read 202 times)

Offline wagnmkr

  • Full Member
  • ****
  • Posts: 914
  • Lindsay, Ontario, Canada
Moon Clock
« on: March 27, 2024, 12:03:59 PM »
The first clock just keeps on ticking so it has encouraged me to try another.

The "Moon Clock" version by the the same designer is out and ready to go, so I have made a start with colour experiments on the moon dial. I can do another color change if I like, right near the end of the printing, to pick out a bit of the texture on the moon surfaces. I don't know yet what I will end up with, but it will be fun.

This is a large clock, being 24" tall and 12 or so inches wide.

 :cheers:



I was cut out to be rich ... but ... I was sewn up all wrong!

Online Kim

  • Global Moderator
  • Full Member
  • *****
  • Posts: 7860
  • Portland, Oregon, USA
Re: Moon Clock
« Reply #1 on: March 27, 2024, 02:28:09 PM »
Sounds like this will be a fun project!  :popcorn: :popcorn:

Kim

Offline wagnmkr

  • Full Member
  • ****
  • Posts: 914
  • Lindsay, Ontario, Canada
Re: Moon Clock
« Reply #2 on: March 27, 2024, 09:56:29 PM »
Kim, I am looking forward to getting at this. I am reading the assembly notes again to get a better idea of how it all works.

 :cheers:
I was cut out to be rich ... but ... I was sewn up all wrong!

Offline Krypto

  • Full Member
  • ****
  • Posts: 128
Re: Moon Clock
« Reply #3 on: March 27, 2024, 11:51:16 PM »
Looking forward to it!
My Workshop Blog:  https://doug.sdf.org/

Offline wagnmkr

  • Full Member
  • ****
  • Posts: 914
  • Lindsay, Ontario, Canada
Re: Moon Clock
« Reply #4 on: Today at 09:14:02 AM »
Thanks Krypto.
I was cut out to be rich ... but ... I was sewn up all wrong!

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal