New Member

[Mauiray]

Hi All
I joined this forum after looking at some incredible engine builds. I have a Sieg 7X16 lathe and Sieg X2 mini mill.So far I have built 2 wobbler engines and I  am in the process of building Tubal Cains 2 cyl yellow boy, although not quite up to the build quality I have been seeing from the posts here. For my next engine if I could get a copy of the plans I would like to build Stewart Harts horizontal Pottymill  engine. Thanks for a great forum.

[10KPete]

Welcome Mauiray!! Post some pictures of your engines, we love pictures.

Pete

[Dave Otto]

Welcome to MEM Mauiray, I hope you enjoy yourself here.

Dave

[vcutajar]

Hi Mauiray and welcome to the group.

Vince

[Flyboy Jim]

Hi All
I joined this forum after looking at some incredible engine builds. I have a Sieg 7X16 lathe and Sieg X2 mini mill.So far I have built 2 wobbler engines and I  am in the process of building Tubal Cains 2 cyl yellow boy, although not quite up to the build quality I have been seeing from the posts here. For my next engine if I could get a copy of the plans I would like to build Stewart Harts horizontal Pottymill  engine. Thanks for a great forum.

Hi Mauiray,

Welcome to this wonderful forum. I'm a relative newcomer here myself and a complete beginner when it comes to machining. I've also built 2 wobblers and am now doing a build thread on my Elmer's #43.

You will find great folks here who are helpful, supportive and encouraging, no matter what you're building. Hopefully you'll consider doing a build thread on your Tubalcain's Yellow Boy. Also, believe me when folks say they like pictures, they really mean it!

Jim

[Kim]

Hi Mauiray, welcome to the forum!
Kim

[Robert Hornby]

Welcome on board Mauiray, lots of good stuff here.
Robert

[Roger B]

Welcome to the Forum   

[scc]

Hi, Welcome along                Terry

[steamer]

Welcome Mauiray!

Dave

[b.lindsey]

Good to have you Mauiray. Welcome.

Bill

[Don1966]

Hi Mauiray and welcome!


 
Don