Author Topic: Re: New member  (Read 1307 times)

Offline tonitd1490

  • Jr. member
  • **
  • Posts: 1
Re: New member
« on: April 03, 2016, 08:29:20 PM »
Hello all.

I am ToniTd1490, an industrial engineer, I am from  Spain, and I have always liked the model engines, I built my first engine six years ago, it was the Bogstandard’s “Paddleduck” Engine. Since 2009 I am lurking in many foruns and I enjoy everything about scale models.  I have a small lathe OPTIMUM and a mini mill QUANTUM.

ToniTD

Offline b.lindsey

  • Global Moderator
  • Full Member
  • *****
  • Posts: 13705
  • Dallas, NC, USA
    • Workbench-Miniatures
Re: New member
« Reply #1 on: April 03, 2016, 08:53:04 PM »
Hi Toni and welcome to MEM. I took the liberty of breaking out your introduction into a separate thread so you can be greeted separately from JR.

Bill

Offline paul gough

  • Full Member
  • ****
  • Posts: 405
  • Tropical Queensland, Australia
Re: New member
« Reply #2 on: April 04, 2016, 01:00:26 AM »
Greetings Toni, Hope you do more than lurk in the shadows here. I, or I should say, we, would enjoy seeing and reading something on your model making. It would also be instructive if you could give us your assessment/opinion on the Optimum machines you have. These have only recently become available here in Australia and comments from a user would be very welcome. Regards, Paul Gough.

Offline Dave Otto

  • Full Member
  • *****
  • Posts: 3619
  • Boise, Idaho USA
    • Photo Bucket
Re: New member
« Reply #3 on: April 04, 2016, 01:55:16 AM »
Welcome to MEM Toni

Dave

Offline Kim

  • Global Moderator
  • Full Member
  • *****
  • Posts: 3705
  • Portland, Oregon, USA
Re: New member
« Reply #4 on: April 04, 2016, 02:46:05 AM »
Hi there Toni,
Welcome to the group!
Kim
« Last Edit: April 06, 2016, 05:35:36 AM by Kim »

Offline Flyboy Jim

  • Full Member
  • ****
  • Posts: 1573
  • Independence, Oregon
Re: New member
« Reply #5 on: April 04, 2016, 03:07:07 AM »
Toni,

Welcome to MEM. I'm pretty new here myself (about 3 months now). You won't find a more knowledgable, helpful and encouraging group anywhere.

And believe me when they say they like pictures...............they really do.................. and won't hesitate to remind you of that!  :) So post away.

Jim
Sherline 4400 Lathe
Sherline 5400 Mill
"You can do small things on big machines, but you can do small things on small machines".

Offline vcutajar

  • Full Member
  • ****
  • Posts: 2484
  • Marsascala, MALTA
Re: New member
« Reply #6 on: April 04, 2016, 04:37:29 AM »
Hi Toni and welcome to the group.

Vince

Offline sshire

  • Full Member
  • *****
  • Posts: 3044
    • LS Editions
Re: New member
« Reply #7 on: April 04, 2016, 12:51:42 PM »
Good to have you here, Toni. I'd also be interested in the Optimum machines
Best,
Stan

Offline Roger B

  • Global Moderator
  • Full Member
  • *****
  • Posts: 4018
  • Switzerland
Re: New member
« Reply #8 on: April 04, 2016, 01:30:48 PM »
Welcome to the forum  :ThumbsUp:  :ThumbsUp: As others have said we like pictures  :)
Best regards

Roger

Offline Don1966

  • Full Member
  • *****
  • Posts: 5999
  • Morgan City, LA (Along the Gulf Coast)
Re: New member
« Reply #9 on: April 04, 2016, 02:06:18 PM »
Hi Toni and welcome to the Forum!

 :hi:

Don

Offline fumopuc

  • Full Member
  • ****
  • Posts: 2397
  • Munich, Germany, EU
Re: New member
« Reply #10 on: April 04, 2016, 07:22:36 PM »
Hi Toni, welcome to MEM. Good to have another European member.
Kind Regards
Achim