Author Topic: Gauge 1 GWR Saint  (Read 5363 times)

Offline mikemill

  • Full Member
  • ****
  • Posts: 308
Re: Gauge 1 GWR Saint
« Reply #15 on: June 13, 2016, 09:38:07 AM »
Thanks for your kind comments, regarding painting models I use scouring powder (pumice) with an old tooth brush to remove any traces of flux and abrade the surface, then gray primmer (spray can) followed by two coats of colour applied with a basic air brush then left in the boiler room for two days to harden.