Sorry V45, been kinda busy. I'll try to get you some pics, but understand the lathe may be a couple of years away from going away. It is a 10K Tool Room Model A, with QC gearbox, on a South Bend cabinet bench, fully accessorized with metric transposing gears, Steady and traveling rests, face plates, 3 and 4 jaw chucks, taper attachment, gallon of matching paint, ER-32 collet set, about a dozen QCTP holders on an Aloris tool post.
I'll make a proper list someday.
It has no measurable wear on the flame-hardened ways and a new saddle feed screw nut. They will have to pry me off it when the day comes.
Now, the Derbyshire is going to go immediately. It is in beautiful shape, not one of those industrial clapped out ones from EBay. New motor and VFD. Full sets of 3C and new 10 m/m D type collets.
So, I'll post it here first.
It will go to make room for the Sherline.
Mosey