Welcome to ModelEngineMaker !If you have problems registering or logging in, please use the contact menu option to request assistance.
Machinist-Birds - chuck up a pig and see what you can build!
For rounding corners like that I usually take it to the disc or belt sander, plate flat on the table and hand rotate it through 90 to take off the corner. Takes just a little coordination but goes quick.
Quote from: crueby on April 02, 2016, 10:57:03 PMFor rounding corners like that I usually take it to the disc or belt sander, plate flat on the table and hand rotate it through 90 to take off the corner. Takes just a little coordination but goes quick.I'll try that. I can practice on some scrap and see if I get what I want. Thanks.
That is quite a nice family shot there Zee. And a real picture too, not those out of focus virtual holes