Welcome to ModelEngineMaker !If you have problems registering or logging in, please use the contact menu option to request assistance.
You guys lost me about 6 posts ago; but that's not to hard. Dave
Sometimes we fall into an infinite loop.Without a watchdog...we're toast.
I've missed a couple days in keeping up with the forum and I'm suddenly 5 pages behind. I read them all and you've bored one hole. That's a pretty impressive feat!
Zee, your thread takes the cake (or maybe the cookie). I've missed a couple days in keeping up with the forum and I'm suddenly 5 pages behind. I read them all and you've bored one hole.
Quote from: zeeprogrammer on January 30, 2016, 02:07:36 AMI have no hysteresis.I'm surprised. I think you're absolutely hysterical. Oh, wait...
I have no hysteresis.
Quote from: Kim on January 30, 2016, 06:22:39 PMZee, your thread takes the cake (or maybe the cookie). I've missed a couple days in keeping up with the forum and I'm suddenly 5 pages behind. I read them all and you've bored one hole. ... and a dozen people.
careful about marring the finish on the cover plate.When the cover plate was being turned originally, that was the time to drill the piston rod holes since you know it would be concentric to the part you were turning.
Light cuts.Happy to take warnings with this.
Quote from: zeeprogrammer on January 30, 2016, 07:44:29 PMLight cuts.Happy to take warnings with this.Do you have enough material for two new cylinders and covers?
Also, how do you propose to "turn both covers and cylinder as one" if one of the covers is held in the chuck?
Quote from: zeeprogrammer on January 30, 2016, 07:44:29 PMLight cuts.Happy to take warnings with this.Do you have enough material for two new cylinders and covers?Also, how do you propose to "turn both covers and cylinder as one" if one of the covers is held in the chuck?