Author Topic: Cabin Fever 2016  (Read 16647 times)

Offline PStechPaul

  • Full Member
  • ****
  • Posts: 688
  • Cockeysville, MD 21030
Re: Cabin Fever 2016
« Reply #15 on: December 05, 2015, 02:17:41 AM »
I plan to attend, but weather is also a factor, driving up from just N of Baltimore. There seems to be plenty of room for camping there:










 
I haven't done much machining since last April, but maybe I can finish my original dual piston opposed air engine.
 
« Last Edit: December 05, 2015, 02:42:03 AM by PStechPaul »

Offline 90LX_Notch

  • Full Member
  • ****
  • Posts: 1405
  • North Eastern Pennsylvania USA
    • YouTube Channel
Re: Cabin Fever 2016
« Reply #16 on: December 20, 2015, 11:45:06 PM »
Well, I just finished checking the kids' swim schedule and sure enough there is an away meet the weekend of CF.   I wish I could make it; but, it just isn't in the cards this year.  For those going, enjoy.

-Bob
Proud Member of MEM

My Engine Videos on YouTube-
http://www.youtube.com/user/Notch90usa/videos

Offline PStechPaul

  • Full Member
  • ****
  • Posts: 688
  • Cockeysville, MD 21030
Re: Cabin Fever 2016
« Reply #17 on: December 21, 2015, 04:28:58 AM »
Wow, quite a few of the "usual suspects" will be missing, it seems. Will there still be a table set aside for MEM? I hope to have a couple of new things to show there, but I tend to procrastinate and maybe just focus on one item. Hope to see some of you folks there! And I hope this warm weather continues until then. At least, hopefully, we won't get another "polar vortex" or mega-snowstorm.  :o

Offline Mosey

  • Full Member
  • ****
  • Posts: 1584
  • Rosemont, New Jersey, USA
Re: Cabin Fever 2016
« Reply #18 on: December 21, 2015, 01:26:06 PM »
This might break a few hearts, but doesn't look like I'll make it this year. Going to miss all you great and talented guys and gals. The new dates, the location, the weather, and the fact that I haven't made many chips, all conspire to my staying home, plus I'm being forced to go to the beach in February.
I'll miss the fun.   :shrug:
Mosey

Offline sshire

  • Full Member
  • *****
  • Posts: 3044
    • LS Editions
Re: Cabin Fever 2016
« Reply #19 on: December 21, 2015, 01:26:15 PM »
As usual, I'll be there early to reserve MEM spaces. Post here if you'll be there and I'll add you to the list.
I'm really trying to get the Coventry engine done but it seems as if there is a conspiracy afoot: Thanksgiving, then, visit from our son, then, holiday activities, etc,etc.
Best,
Stan

Offline cheepo45

  • Full Member
  • ****
  • Posts: 154
Re: Cabin Fever 2016
« Reply #20 on: December 21, 2015, 02:03:50 PM »
I'll be there all 3 days. Save me a spot.
Looking forward to it!
       cheepo45

Offline Dreeves

  • Full Member
  • ****
  • Posts: 162
Re: Cabin Fever 2016
« Reply #21 on: December 22, 2015, 12:58:19 AM »
I will be there Friday at when the doors open see ay all there

Dave

Offline jschoenly

  • Full Member
  • ****
  • Posts: 82
Re: Cabin Fever 2016
« Reply #22 on: December 22, 2015, 02:28:38 PM »
Hey Guys,

Sorry we have been on the quiet side, but it doesn't mean we aren't in full swing of planning for the show.  We are looking forward to the change back to January and are busy working out the details of the move.  I'm sure there will be some hiccups and adjustments this first year with everyone getting used to the new building (including us!), but we are excited!

One thing I wanted to get out there and make sure people know about is a change to the Exhibitor Appreciation Event.  In past years we have done a dinner and it was well received.  With the new venue, we thought a change would be good here as well and therefore are excited to announce we will instead be having a Sunday Morning Breakfast!  In appreciation to all our exhibitors for making the show what it is, you will received a voucher for your free breakfast onsite on Sunday morning when you check into the show.  This breakfast will be open to everyone, public included and will be ~$8 for general admittance. 

As always if anyone has any questions, please feel free to message me, email us at cabinfeverexpo@gmail.com or call us at 800-789-5068.  We are sad to hear those who can not attend, but looking forward to everyone who is able this year and in the future!  Hoping to see some new faces in addition to the regular crowd!  Bring someone new along!  Thanks and see you soon!

Jared
Jared
                                 Cabin Fever Expo
--- Model Engineering and Home Shop Hobbies in all Forms! ---

Offline Phil_L

  • Full Member
  • ****
  • Posts: 30
Re: Cabin Fever 2016
« Reply #23 on: December 22, 2015, 06:46:35 PM »
Hey all. 
I had a great time last year doing my first time at CF as an exhibitor.  I'm looking forward to doing it again this year.
I've been working on my 1/6 scale Otto Langen.  I have it very close to running so I hope I can get it finished enough to run at the show.  It may not be in all prettied up but it will be close.

Stan,
Can you put me down for a table please?

Offline sshire

  • Full Member
  • *****
  • Posts: 3044
    • LS Editions
Re: Cabin Fever 2016
« Reply #24 on: December 22, 2015, 08:39:40 PM »
Gotcha , Phil
Best,
Stan

Offline sshire

  • Full Member
  • *****
  • Posts: 3044
    • LS Editions
Re: Cabin Fever 2016
« Reply #25 on: January 03, 2016, 04:27:43 PM »
REMINDER!!!

If you want MEM table space for Cabin Fever, post here so I can make your "Reserved" sign.

There must be more people than Cheepo45, DReeves, Phil, Paul and myself.
I know Ron is with NAMES and the CNC folks and PhilJoe is at the R&T table.

All of you "weather" woosies can leave the shop for a few days.
Best,
Stan

Offline zeeprogrammer

  • Full Member
  • *****
  • Posts: 6373
  • West Chester, PA, USA
Re: Cabin Fever 2016
« Reply #26 on: January 03, 2016, 04:55:28 PM »
I plan to be there but I have nothing to show.  :'(
Carl (aka Zee) Will sometimes respond to 'hey' but never 'hey you'.
"To work. To work."
Zee-Another Thread Trasher.

Offline Dave Otto

  • Full Member
  • *****
  • Posts: 3583
  • Boise, Idaho USA
    • Photo Bucket
Re: Cabin Fever 2016
« Reply #27 on: January 03, 2016, 05:32:59 PM »
Phil

The Otto & Langen looks amazing! You have been keeping this a secret from us?

Would love to see more pictures of the build.

Dave

Offline Brass_Machine

  • Administrator
  • Full Member
  • *****
  • Posts: 273
  • North Jersey
    • MadModder
Re: Cabin Fever 2016
« Reply #28 on: January 04, 2016, 01:36:53 AM »
I should be there on Saturday with my son. Nothing to show... just as an observer.

One of these years I will have something to show.

Eric

Offline zeeprogrammer

  • Full Member
  • *****
  • Posts: 6373
  • West Chester, PA, USA
Re: Cabin Fever 2016
« Reply #29 on: January 04, 2016, 01:39:41 AM »
What about setting a time to get together or for pictures?
There's a number of people I know were at CF when I was there but I missed meeting them.
Carl (aka Zee) Will sometimes respond to 'hey' but never 'hey you'.
"To work. To work."
Zee-Another Thread Trasher.