Author Topic: Wanted Copper Tube  (Read 811 times)

Offline sbwhart

  • Full Member
  • ****
  • Posts: 710
  • Live Long and Prosper
Wanted Copper Tube
« on: June 26, 2015, 06:52:32 AM »
Hi

I have a friend who is building a 71/4" Gauge model of a LMS Crab 2-6-0 Loco and he is trying to obtain a length of copper tube for the boiler 8" to 81/4" OD * 20" in Length with a wall thickness 4mm or 5mm

He has a piece of sheet he could roll into a tube but would like to try and obtain a length of tube to save a bit of work.

Location NW of England

Thanks

Stew
A little bit of clearance never got in the way

Offline Bluechip

  • Full Member
  • ****
  • Posts: 814
  • Derbyshire
Re: Wanted Copper Tube
« Reply #1 on: June 26, 2015, 08:46:09 AM »
M-Metals have 10SWG which is about 3mm [?] or try LiveSteamModels, they may get it ??? Not stocked it seems ...

Dave
« Last Edit: June 26, 2015, 08:49:22 AM by Bluechip »

Offline Stuart

  • Full Member
  • ****
  • Posts: 1784
  • Tilchestune UK
Re: Wanted Copper Tube
« Reply #2 on: June 26, 2015, 11:28:13 AM »
Stew

I doubt if you will get a short length of that size or gauge / thickness

But by ek Evan annealed you would need a stout set of rollers , to get it round.

And a humugus lot of heat to silver solder it up


Have you tried black gates  ?

Sorry cannot be more helpful

Stuart
My aim is for a accurate part with a good finish