Author Topic: Ultra Tiny (1/4 scale Tiny)  (Read 18038 times)

Online Dave Otto

  • Full Member
  • *****
  • Posts: 3614
  • Boise, Idaho USA
    • Photo Bucket
Re: Ultra Tiny (1/4 scale Tiny)
« Reply #75 on: February 13, 2017, 01:18:54 AM »
Wow! that's amazing!

Dave

Offline 90LX_Notch

  • Full Member
  • ****
  • Posts: 1406
  • North Eastern Pennsylvania USA
    • YouTube Channel
Re: Ultra Tiny (1/4 scale Tiny)
« Reply #76 on: February 13, 2017, 01:32:05 AM »
Thanks gentlemen.

Hopefully, it is that YouTube is on the fritz.  More then likely, it is my outdated pc.  The clip above was shot with my iPad.  I don't have an editor for it; so, I have to keep it simple. 

It's a shame because I found some machining videos of the engine that I included in the edited video on the pc.

-Bob
Proud Member of MEM

My Engine Videos on YouTube-
http://www.youtube.com/user/Notch90usa/videos

Offline Flyboy Jim

  • Full Member
  • ****
  • Posts: 1548
  • Independence, Oregon
Re: Ultra Tiny (1/4 scale Tiny)
« Reply #77 on: February 13, 2017, 03:08:52 AM »
That's impressive, Bob! That's gotta be the biggest knurled knob I've ever seen! It must be at least 3 feet across and probably must weigh 100 lbs! Thanks for putting your wobbler on it to give it some perspective.

OK kidding aside..............that is a really impressive build. Well done. I hope you're able to post some machining videos.

Jim



Sherline 4400 Lathe
Sherline 5400 Mill
"You can do small things on big machines, but you can do small things on small machines".

Online Kim

  • Global Moderator
  • Full Member
  • *****
  • Posts: 3696
  • Portland, Oregon, USA
Re: Ultra Tiny (1/4 scale Tiny)
« Reply #78 on: February 13, 2017, 04:56:08 AM »
That is mighty impressive, Bob!
Thanks for posting the video.  It does sound like a bee, doesn't it?  ;)
Kim

Offline Don1966

  • Full Member
  • *****
  • Posts: 5997
  • Morgan City, LA (Along the Gulf Coast)
Re: Ultra Tiny (1/4 scale Tiny)
« Reply #79 on: February 13, 2017, 04:25:05 PM »
Damn Bob missed your post but just say your video. That is one small engine and is that the same one you were working on that I seen at CF a couple of years back? Very nice work by the way..... :praise2:

Don

Offline 90LX_Notch

  • Full Member
  • ****
  • Posts: 1406
  • North Eastern Pennsylvania USA
    • YouTube Channel
Re: Ultra Tiny (1/4 scale Tiny)
« Reply #80 on: February 13, 2017, 08:19:42 PM »
Thanks Jim and Kim.  It's not looking good for the "trapped" videos.  I've definitely got stung by this bee!

Yes Don it is.  I ran it for the first time the the next day after that show. It had a hiccup this year so I took it apart and fixed it.  Right now it runs great.  I hope it stays that way.

-Bob
Proud Member of MEM

My Engine Videos on YouTube-
http://www.youtube.com/user/Notch90usa/videos

Offline mike mott

  • Full Member
  • ****
  • Posts: 324
  • Alberta Canada
Re: Ultra Tiny (1/4 scale Tiny)
« Reply #81 on: February 17, 2017, 07:24:08 PM »
Bob I just watched the little blighter. that is amazing so what are you going to run with it? a small water pump perhaps? :lolb:

Mike
If you can imagine it you can build it

Offline 90LX_Notch

  • Full Member
  • ****
  • Posts: 1406
  • North Eastern Pennsylvania USA
    • YouTube Channel
Re: Ultra Tiny (1/4 scale Tiny)
« Reply #82 on: June 04, 2018, 12:23:25 AM »
Update-

 I just added the YouTube video to the first post of this thread that I made in February 2017 of the repair that I was unable to post at that time. It also includes some pictures and video from when the engine was originally being built.

-Bob
Proud Member of MEM

My Engine Videos on YouTube-
http://www.youtube.com/user/Notch90usa/videos

Offline b.lindsey

  • Global Moderator
  • Full Member
  • *****
  • Posts: 13686
  • Dallas, NC, USA
    • Workbench-Miniatures
Re: Ultra Tiny (1/4 scale Tiny)
« Reply #83 on: June 04, 2018, 12:40:06 AM »
Still an amazing piece of work Bob. Thanks for adding this latest video!!

Bill