Author Topic: Don's workshop  (Read 10503 times)

Offline Don1966

  • Full Member
  • *****
  • Posts: 6817
  • Columbia, MS
Don's workshop
« on: March 30, 2015, 05:00:19 PM »
Well I have been doing some spring cleaning and after a little organizing I thought some of you might be interested in seeing my shop. I bet you wouldn't be able to guess what my favorite color is.
The first four photo's start from left and ends right. This is the A/C and heating side of the shop. The shop is 30 x 40 ft and is split down the middle with one side enclose and the other opened so I can drive my truck into it when needed. I have enclose a 10 x 15 ft section for an office and 10 x 5 ft for a bath room.




In the photo you can see inside my office.

This is my nuk as I call it.


The other half of the shop is where I keep the welding rigs and varies other equipment.
This is my work bench and you can tell I got cared away with blue paint. I will be reprinting it soon.

A few toys bandsaw, router, drum sander and die filer.

Main tool box just haven't gotten to cleaning it yet.






I hope you enjoyed the photos nd thanks for looking.

Don

Offline mike mott

  • Full Member
  • ****
  • Posts: 418
  • Alberta Canada
Re: Don's workshop
« Reply #1 on: March 30, 2015, 05:25:56 PM »
Very nicely organized, Don, and seems like you have pretty much all you need in the way of machines.

mike
If you can imagine it you can build it

Offline b.lindsey

  • Global Moderator
  • Full Member
  • *****
  • Posts: 13860
  • Dallas, NC, USA
    • Workbench-Miniatures
Re: Don's workshop
« Reply #2 on: March 30, 2015, 05:26:44 PM »
Wow Don, that is most impressive and multiple spaces as well!!  I am envious!! Thanks for sharing those.

Bill
.

Online Kim

  • Global Moderator
  • Full Member
  • *****
  • Posts: 7863
  • Portland, Oregon, USA
Re: Don's workshop
« Reply #3 on: March 30, 2015, 05:28:56 PM »
Hi Don,
Thanks for the great tour of your workshop!  Its beautiful!  You have a lot of nice space there and everything is so clean and organized.  I love it!

Thanks for taking the time to post the pics and giving us a view into your sanctuary.
Kim

Offline peatoluser

  • Full Member
  • ****
  • Posts: 242
  • liverpool UK
Re: Don's workshop
« Reply #4 on: March 30, 2015, 06:17:05 PM »
very impressive and very tidy. I particularly like the wooden tool chest and the small lathe on the shelf.
thanks  for the tour

peter

Offline fumopuc

  • Full Member
  • *****
  • Posts: 3231
  • Munich, Germany, EU
Re: Don's workshop
« Reply #5 on: March 30, 2015, 07:17:40 PM »
Hi Don, seeing all these space, equipped with these nice tools I get immediately this feeling, that I have to go into a small dark room, closing the door and start crying for some time. Or with other words, I am jealous.
Enjoy it, it is a good feeling to have a proper space to go in  and to leave the rest of the world outside.
Kind Regards
Achim

Offline zeeprogrammer

  • Full Member
  • *****
  • Posts: 6811
  • West Chester, PA, USA
Re: Don's workshop
« Reply #6 on: March 30, 2015, 10:22:17 PM »
Nice!

10x5 bathroom eh? I could live in that if I can have access to all your toys. What's the rent?
Carl (aka Zee) Will sometimes respond to 'hey' but never 'hey you'.
"To work. To work."
Zee-Another Thread Trasher.

Offline Art K

  • Full Member
  • ****
  • Posts: 1761
  • Madison, Wisconsin USA
Re: Don's workshop
« Reply #7 on: March 30, 2015, 11:16:38 PM »
Don,
The shop looks great. I like the wood paneling and cabinets. To bad about needing space for the truck :LittleDevil:. I ran into that problem with my garage.
Art
"The beautiful thing about learning is that no one can take it away from you" B.B. King

Offline philjoe5

  • Full Member
  • ****
  • Posts: 1012
Re: Don's workshop
« Reply #8 on: March 30, 2015, 11:38:42 PM »
Nice shop Don.  It looks pretty well organized and almost spotless.  Thanks for sharing.  My only disappointment is that I couldn't find the reference bottle of Tabasco sauce ::)

Cheers,
Phil
If you pick up a starving dog and make him prosperous, he will not bite you. This is the principal difference between a dog and a man.  - Mark Twain

Offline Don1966

  • Full Member
  • *****
  • Posts: 6817
  • Columbia, MS
Re: Don's workshop
« Reply #9 on: March 31, 2015, 12:36:07 AM »
Thanks guys for looking and commenting.

very impressive and very tidy. I particularly like the wooden tool chest and the small lathe on the shelf.
thanks  for the tour

peter
Peter the small lathe is an American watch makers lathe and the tool boxes are from Grizzly.

Nice!

10x5 bathroom eh? I could live in that if I can have access to all your toys. What's the rent?
Zee if you want it it's yours rent free. See you at CF.
Don,
The shop looks great. I like the wood paneling and cabinets. To bad about needing space for the truck :LittleDevil:. I ran into that problem with my garage.

Art
Thanks Art and how is your new shop coming along? By the way I don't park my truck in the shop, the space is there should I need to work on it.
Nice shop Don.  It looks pretty well organized and almost spotless.  Thanks for sharing.  My only disappointment is that I couldn't find the reference bottle of Tabasco sauce ::)

Cheers,
Phil
PHIL if you look close at the left side of the pillar tool you can see the box.  :lolb:

Don

Offline steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 12697
  • Central Massachusetts, USA
Re: Don's workshop
« Reply #10 on: March 31, 2015, 01:53:01 AM »
Good lord Don.   That's beautiful!
"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Offline 90LX_Notch

  • Full Member
  • ****
  • Posts: 1613
  • North Eastern Pennsylvania USA
    • YouTube Channel
Re: Don's workshop
« Reply #11 on: March 31, 2015, 02:32:16 AM »
I concur with Dave's statement.  That is one beautiful shop Don.  I'm jealous.

-Bob
Proud Member of MEM

My Engine Videos on YouTube-
http://www.youtube.com/user/Notch90usa/videos

Offline PStechPaul

  • Full Member
  • ****
  • Posts: 688
  • Cockeysville, MD 21030
Re: Don's workshop
« Reply #12 on: March 31, 2015, 08:01:31 AM »
I'm really ashamed of my "shop" now after seeing how clean and well-organized yours is. I'm also impressed with your electronic equipment. Maybe once I get my orthopedic issues addressed I'll be able to clean up and organize my shop a little better, but it'll never be any thing near what you have. I'm busy getting things ready for CF, and hopefully I'll have time to do a bit more on my TIgTac transistor ignition and tachometer you were interested in. It basically works as a tachometer and fires the spark when the "points" open, but I have not incorporated the variable advance/retard.
 
I recently got a new milling vise as well as a smaller 4" toolmakers vise during Enco's recent sale, but haven't used them yet. Maybe the nice shiny vise will inspire me to clean up and make things easier to use. It's also just about my favorite color* (although a little greener than this picture shows):

 
And I love the "Chinglish" users manual!

 
*It seems your favorite color is brown, because of all the wooden cabinets...  :shrug: :Lol:

Offline vcutajar

  • Full Member
  • *****
  • Posts: 2555
  • Marsascala, MALTA
Re: Don's workshop
« Reply #13 on: March 31, 2015, 11:18:01 AM »
Quote
Hi Don, seeing all these space, equipped with these nice tools I get immediately this feeling, that I have to go into a small dark room, closing the door and start crying for some time. Or with other words, I am jealous.

Have to agree with Achim.  Major workshop jealousy.  It also reminded me of my disorganised workshop and started missing it. :'(

Vince

Offline Tennessee Whiskey

  • Full Member
  • *****
  • Posts: 3781
  • Springfield, Tennessee. USA
Re: Don's workshop
« Reply #14 on: March 31, 2015, 12:55:18 PM »
Dog, those aren't work areas, they are operating rooms :ThumbsUp: :ThumbsUp: :ThumbsUp:. Only thing, I didn't see any game or fish mounts on the wall, not a sign of any fishing gear, or any signs of a crock pot, you sure you in La. :lolb: :lolb:.

Cletus

Offline Don1966

  • Full Member
  • *****
  • Posts: 6817
  • Columbia, MS
Re: Don's workshop
« Reply #15 on: March 31, 2015, 02:35:09 PM »
Thanks guys for looking in. Now I didn't set out to made any of you cry.  :lolb: This shop had been a dream of mine for a lone time when I finnaly built it in 2000 and layed it out like I wanted it.
Dog, those aren't work areas, they are operating rooms :ThumbsUp: :ThumbsUp: :ThumbsUp:. Only thing, I didn't see any game or fish mounts on the wall, not a sign of any fishing gear, or any signs of a crock pot, you sure you in La. :lolb: :lolb:.

Cletus
Dog I give up hunting and fishing a long time ago. I didn't have the heart to kill anything anymore and reading has taken the place of fishing. We use to boil our crawfish here but now it's just as easy to go out to eat them saves the mess. Thanks my brother.

Don

Offline Mosey

  • Full Member
  • ****
  • Posts: 1598
  • Rosemont, New Jersey, USA
Re: Don's workshop
« Reply #16 on: March 31, 2015, 05:52:39 PM »
So, Don, Buddy,
You did me another big favor in showing the TajMaHal of workshops! Now, if she gives me any negative feedback about buying more machines, tools, or expanding my shop, I just refer her to the pictures of yours!
WHoopee  :pinkelephant: :cartwheel: :lolb: :ROFL:

Offline Mike Bondarczuk

  • Full Member
  • ****
  • Posts: 194
Re: Don's workshop
« Reply #17 on: March 31, 2015, 05:54:21 PM »
Hi Don,

Very impressive workshop layout and may I just ask about the casters under the mill.

I have the same 626 mill and will be moving into the new workshop extension later in the year and am wondering whether you have experienced any chatter when cutting or any other movements with the whole assembly on wheels, or have you secured them somehow.

Best regards,

Mike :noidea:
"Everything I can't find is in a totally secure place"

Offline Don1966

  • Full Member
  • *****
  • Posts: 6817
  • Columbia, MS
Re: Don's workshop
« Reply #18 on: March 31, 2015, 06:47:03 PM »
So, Don, Buddy,
You did me another big favor in showing the TajMaHal of workshops! Now, if she gives me any negative feedback about buying more machines, tools, or expanding my shop, I just refer her to the pictures of yours!
WHoopee  :pinkelephant: :cartwheel: :lolb: :ROFL:
Thanks Mosey and I will see you and your wife at CF.

Hi Don,

Very impressive workshop layout and may I just ask about the casters under the mill.

I have the same 626 mill and will be moving into the new workshop extension later in the year and am wondering whether you have experienced any chatter when cutting or any other movements with the whole assembly on wheels, or have you secured them somehow.

Best regards,

Mike :noidea:
Mike I put the casters on the mill to be able to move it around. But I have Jack ups in between the caster to level it with and get it off the casters. I have some 2.5" x.75"  slices of cold roll tapped in the center to 1/2" and use an all thread Rod to push through the hole on the base of the mill. With the two nuts between the mill and pad I jack it up till level then lock it with the top nut. Hope that helps.

Don

Offline Camm-1

  • Full Member
  • ****
  • Posts: 286
  • Sweden
Re: Don's workshop
« Reply #19 on: March 31, 2015, 08:20:24 PM »
Thats how a workshop should look like :praise2: Maybe should ask what do you not have ;)
I hope to start building a new shop next year on ca 4x10 m when we have moved to the house we just bought.
Have to make a new kitchen first so She is happy, then I can build :cheers:
Ove

Offline Dave Otto

  • Full Member
  • *****
  • Posts: 4693
  • Boise, Idaho USA
    • Photo Bucket
Re: Don's workshop
« Reply #20 on: April 02, 2015, 12:44:23 AM »
Beautiful shop Don!

I have been crazy busy and was out of town last weekend; still trying to catch up. I was going to comment when you originally posted the pictures. It would be nice to have a shop that I didn't have to share with the vehicles; and no, parking outside is not an option.

Dave

Offline Mark

  • Full Member
  • ****
  • Posts: 5
  • NW UK Just getting started with Model Engineering
    • My weather station wensite
Re: Don's workshop
« Reply #21 on: May 28, 2015, 01:58:09 PM »
Hi Don

Very nice shop you have there well designed and equipped.
Thanks for showing us as it gives ideas for the future.

Regards

Mark

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal